Member ID: password:
  Join Now
Directory and Search for Global Trade
Local Site: China Japan Korea Russia Vietnam France Spain India Germany Italy Argentina Brazil
Updated Day: Home > Offer to sell
high flux tube
Category:General Industrial Equipment/Chemical Equipment/Heat Transfer Equipment
  • Post Date:2019-09-10 09:55:23
  • Expiry Date:1 year
  • Quantity:
  • Specs:OD 19mm/25mm/32mm,length 2000~14000 mm
  • Payment Method:
Product Detail
Company Profile
Products List
Contact
High flux tube can be classified into three groups: sintered high flux tube, sprayed high flux tube and machined high flux tube. Among them, sintered high flux tube is the most expensive for its complex processing method and high efficiency; machined high flux tube is applied to mediums with high surface tension, its performance is in between; sprayed high flux tube is the cheapest for its easy process and low efficiency. On the one hand, high flux tube can reduce the steam demand. On the other hand, it can improve the heat transfer capability. In the large heat transfer system, because of the need of small temperature differences, the number of reboilers needed is very big. The use of high flux tube can reduce 3/4 the amount of reboilers, and temperature difference ΔT asks for only 5 ℃. Using high flux tube to replace traditional bare tube can eliminate heat transfer bottlenecks, meet the needs of larger heat load, and significantly increase production. At the same time, under the condition of keeping the same efficiency, it can reduce the cost. Material and size of High Flux Tube Material: nickel-copper alloy(C70600,B10), carbon steel(SA179,10#), aluminum alloy (3003), stainless steel(304L,316L)and so on. Size: OD 19、25、32mm,length 2000~14000 mm Under normal condition, the middle of High flux tube is enhanced section. Both ends are smooth. It is easy to wear tubes and easy for expansion joints. We are OEM of high flux tube and can produce according to customers' needs. Products are packaged with wooden boxes. Applicable medium of high flux heat exchangers Ethylene glycol, light olefin, refrigerant, liquid oxygen, liquid nitrogen. Applications of high flux heat exchangers High flux heat exchanger can be used in phase change equipment, such as, carburetor, evaporator, reboiler and condenser, etc.

Zhejiang Huanchen Super Flux Tube Science Technology Co., Ltd is a private stock enterprise with a registered capital of 13.8 Million RMB and over 10,000 manufacturing coverage. The company is located in Jiaxing City with strong economic growth and advantageous traffic condition.
    The company is one of the leading companies in the related industrial field with good R&D team, well- equipped lab and special intellectual property right.
    The main business scope is series of high efficiency heat transfer tubes and tech consulting service. Main products include high flux tube、twisted tube 、fluted tube,etc. We are targeting on process of heat and mass transfer、high efficient heat transfer、waste heat recovery and material separation. 
    The company insists on the “global standard, tech oriented, high quality and superior service” strategy. Our products has won good reputation in many industrial fields such as  oil & petrol, mineral oil, air separation and refine chemical industrys, etc.

High flux tube can be classified into three groups: sintered high flux tube, sprayed high flux tube and machined high flux tube. Among them, sintered high flux tube is the most expensive for its complex processing method and high efficiency; machined high flux tube is applied to mediums with high surface tension, its performance is in between; sprayed high flux tube is the cheapest for its easy process and low efficiency. On the one hand, high flux tube can reduce the steam demand. On the other hand, it can improve the heat transfer capability. In the large heat transfer system, because of the need of small temperature differences, the number of reboilers needed is very big. The use of high flux tube can reduce 3/4 the amount of reboilers, and temperature difference ΔT asks for only 5 ℃. Using high flux tube to replace traditional bare tube can eliminate heat transfer bottlenecks, meet the needs of larger heat load, and significantly increase production. At the same time, under the condition of keeping the same efficiency, it can reduce the cost. Material and size of High Flux Tube Material: nickel-copper alloy(C70600,B10), carbon steel(SA179,10#), aluminum alloy (3003), stainless steel(304L,316L)and so on. Size: OD 19、25、32mm,length 2000~14000 mm Under normal condition, the middle of High flux tube is enhanced section. Both ends are smooth. It is easy to wear tubes and easy for expansion joints. We are OEM of high flux tube and can produce according to customers' needs. Products are packaged with wooden boxes. Applicable medium of high flux heat exchangers Ethylene glycol, light olefin, refrigerant, liquid oxygen, liquid nitrogen. Applications of high flux heat exchangers High flux heat exchanger can be used in phase change equipment, such as, carburetor, evaporator, reboiler and condenser, etc.
86-021-54801200
Contact Infomation
Zhejiang Huanchen Super Flux Tube Science &Technology Co., Ltd
[China]
Contact:Mr Liu Along
Address:
NO.168 Jixin Road , Minhang District, Shanghai City, PRC
Tel:86-021-54801200
Fax:86-021-54801200-802
Http:www.hc-supertube.com/en
E-mail:617939408@qq.com