Pneumatisk transport med silopumpe (silopumpe) L0.8-L2.4
Andre produkter
Xiangye's L0.8-L2.4 series of pneumatic conveying silo pumps (silo-type pumps) belong to the L-type fluidized silo pumps, designed for medium and long-distance pneumatic conveying of powdered materials. Below are the comprehensive technical parameters and application characteristics:
1. Core parameters
Model Inner diameter of pump body (mm) Total volume (m³) Maximum conveying distance (m) Working pressure (MPa) Conveying capacity (t/h) Suitable materials

L0.8 800 0.35 500 0.2-0.5 5-12 Cement, fly ash, grain
L1.2 1200 1.3 800 0.2-0.5 12-20 Mineral powder, chemical raw materials
L2.4 2400 9.25 1500 0.2-0.5 50-55 High-density particles (such as coke powder)
Note: The mixing ratio (gas-fly ash ratio) is 50-70, and the gas consumption increases as the model increases (reaching 20 m³/min for L2.4).

2. Structural characteristics
Fluidized design
The bottom fluidization device fully gasifies the material, reduces residue, and improves conveying efficiency by more than 30%.
Automated control
Supports PLC or relay control to realize full-process automation of feeding, pressurization, conveying, and purging.
Modular configuration
Can flexibly match DN50-DN150 conveying pipe diameters, adapting to complex terrains (such as vertical lifting, elbow layout).

3. Application scenarios
Power industry: Fly ash conveying in coal-fired power plants, with a single pump's maximum output of up to 55 tons per hour.
Building materials and chemical industry: High-temperature materials such as cement raw meal and mineral powder (temperature resistance <120℃).
Food and medicine: Sealed pipeline design ensures material cleanliness.
4. Selection suggestions
Short distance (<500m): Prioritize L0.8-L1.2 to reduce energy consumption.
High-wear materials: It is recommended to match with double-layer pipes or wear-resistant linings.
If special customization (such as corrosion-resistant materials, double-silo continuous conveying) is required, detailed calculations should be made based on material characteristics and conveying distance.
| Industrikategori: | Chemicals/Conveying Equipment/Other Conveying Equipment |
|---|---|
| Produktkategori: | |
| Mærke: | |
| Specifikation: | |
| Lager: | |
| Oprindelse: |