Araldite AW106 HV953 High-Strength AB Epoxy Adhesive

Araldite AW106/HV953U is a versatile, two-component, room-temperature curing paste adhesive with high strength and excellent toughness. It is suitable for bonding various metals, alloys, ceramics, gemstones and jade articles, crystals, glass, rubber, hard plastics, cardboard, fibers, leather, textiles, and most commonly used materials. It is a widely applicable adhesive, suitable for both craftsmen and most industrial applications. Product features: 1. Epoxy adhesive with strong bonding power. 2. Super strong, durable, solvent-free adhesive, waterproof, and can be sanded and painted after curing. Product characteristics: 1. Can bond uneven surfaces. 2. Can withstand intense movement. 3. Resistant to chemical solvents, heat (withstands up to 80°C), low temperatures (withstands -50°C), and oil. Usage instructions: 1. Ensure the bonding surfaces are dry, clean, free of dust, oil, and contamination. Roughen the bonding surfaces with sandpaper for better adhesion. 2. Mix the two components thoroughly for at least 30 seconds and use immediately. Apply the adhesive to both surfaces of the joint and carefully align them, keeping the joint fixed until bonded. 3. Allow at least 4-6 hours before subjecting to vigorous handling. Remove excess adhesive with a knife before full curing. Precautions: 1. Keep out of reach of children. Do not ingest. 2. Avoid contact with skin and eyes. If contact with skin occurs, wash with soap and water. If contact with eyes occurs, rinse immediately with plenty of water and seek medical attention. 3. Always replace the colored cap onto the corresponding colored tube to avoid clogging.