Y-type filter
I. Introduction:
The Y-type strainer is an indispensable filtration device in the pipeline system for conveying media. It is usually installed at the inlet end of pressure reducing valves, pressure relief valves, constant level valves or other equipment to remove impurities in the medium and protect the normal operation of valves and equipment. The Y-type strainer has the characteristics of advanced structure, small resistance and convenient sewage discharge. The applicable media for the Y-type strainer can be water, oil and gas. Generally, the mesh for water passage is 18~30 mesh, the mesh for gas passage is 10~100 mesh, and the mesh for oil passage is 100~480 mesh. The basket strainer is mainly composed of a connecting pipe, a main pipe, a filter basket, a flange, a flange cover and fasteners. When the liquid enters the filter basket through the main pipe, solid impurity particles are blocked in the filter basket, and the clean fluid passes through the filter basket and is discharged from the outlet of the strainer.
II. Working Principle:
The Y-type strainer is a small device that removes a small amount of solid particles from the liquid and can protect the normal operation of equipment. When the fluid enters the filter cartridge equipped with a filter screen of a certain specification, its impurities are blocked, and the clean filtrate is discharged from the outlet of the strainer. When cleaning is needed, just take out the detachable filter cartridge, treat it and reinstall it, so the use and maintenance are extremely convenient. The Y-type strainer, also known as a dirt remover or filter valve, is an indispensable device in the pipeline system for conveying media. Its function is to filter mechanical impurities in the medium, such as rust and sand in sewage, and a small amount of solid particles in liquid, so as to protect the accessories on equipment and pipelines from wear and blockage and ensure the normal operation of equipment.
The Y-type strainer is Y-shaped, with one end allowing the passage of fluids such as water and the other end for precipitating waste and impurities. It is usually installed at the inlet end of pressure reducing valves, pressure relief valves, constant level valves or other equipment. Its function is to remove impurities in water and protect the normal operation of valves and equipment. The water to be treated enters the body through the water inlet, and impurities in the water deposit on the stainless steel filter screen, resulting in a pressure difference. The pressure difference switch monitors the pressure difference between the inlet and outlet. When the pressure difference reaches the set value, the electric controller sends signals to the hydraulic control valve and the driving motor, triggering the following actions: the motor drives the brush to rotate to clean the filter element, and the control valve opens to discharge sewage. The whole cleaning process only lasts for tens of seconds. When the cleaning is completed, the control valve closes, the motor stops rotating, and the system returns to its initial state to start the next filtration process. After the equipment is installed, technicians will conduct commissioning, set the filtration time and cleaning conversion time. The water to be treated enters the body through the water inlet, and the strainer starts to work normally.
III. Basic Parameters:
1. Medium temperature: 300(℃);
2. Working pressure difference: 2KG;
3. Material: Stainless steel;
4. Alias: Y-type strainer;
5. Application scope: Liquid filtration;
6. Connection form: Flange;
7. Type: Right-angle type;
8. Flow direction: Unidirectional;
9. Applicable medium: Water;
10. Pressure environment: Normal pressure.
IV. Execution Standards:
Design specification: HG/T21637
Structural length: GB/12221
Flange standard: JB/79
Test and inspection: JB/9092
Product marking: GB/12220
Delivery specification: JB/t7928
V. Parts Materials:
Shell material | Carbon steel WCB, Brass B62 | Stainless steel 304, 316, 316L |
Filter frame and screen material | Stainless steel 304, 316, 316L | |
Seal material | Oil-resistant asbestos, rubber, polytetrafluoroethylene | |
Explosion-proof level | BS5501: IIA, IIB, IIC | |
Ambient temperature (℃) | -30~380 | -80~450 |
Nominal pressure (MPa) | 0.6~5.0 (150Lb~600Lb) | |
Filtration precision (mesh/in) | 10~300 | |
VI. External Connection Dimensions:
Nominal Diameter DN | L | D | D1 | D2 | B | f | n-φ |
15 | 140 | 95 | 65 | 45 | 14 | 2 | 4-φ14 |
20 | 150 | 105 | 75 | 55 | 14 | 2 | 4-φ14 |
25 | 160 | 115 | 85 | 65 | 14 | 2 | 4-φ14 |
32 | 180 | 135 | 100 | 78 | 16 | 3 | 4-φ18 |
40 | 200 | 145 | 110 | 85 | 16 | 3 | 4-φ18 |
50 | 220 | 160 | 125 | 100 | 16 | 3 | 4-φ18 |
65 | 260 | 180 | 145 | 120 | 18 | 3 | 4-φ18 |
80 | 310 | 195 | 160 | 135 | 20 | 3 | 8-φ18 |
100 | 350 | 215 | 180 | 155 | 20 | 3 | 8-φ18 |
125 | 400 | 245 | 210 | 185 | 22 | 3 | 8-φ18 |
150 | 450 | 280 | 240 | 210 | 24 | 3 | 8-φ23 |
200 | 500 | 335 | 295 | 265 | 26 | 3 | 12-φ23 |
250 | 550 | 405 | 355 | 320 | 30 | 3 | 12-φ25 |
300 | 580 | 460 | 410 | 375 | 30 | 4 | 12-φ25 |
350 | 760 | 520 | 470 | 435 | 34 | 4 | 16-φ25 |
400 | 800 | 580 | 525 | 485 | 36 | 4 | 16-φ30 |
450 | 900 | 640 | 585 | 535 | 44 | 4 | 20-φ30 |
| Machinery & Equipment/Filtration Equipment/Filters | |