ZMAS pneumatic angle control valve
I. Introduction:
The ZMAS pneumatic angle control valve is a special valve designed for use in high-pressure systems. When connected to pneumatic or electric (with electro-pneumatic converter) control instruments, etc., it is widely used in industries such as chemical fertilizer, petrochemical, power station, light industry, etc., for automatic regulation and remote control in production processes. The pneumatic diaphragm high-pressure angle control valve changes the flow area of the valve by adjusting the signal pressure, thereby altering the medium flow rate and regulating required parameters (such as pressure, flow rate, temperature, liquid level, etc.). Except for the angle-shaped valve body, its other structures are similar to those of a single-seat valve. Its characteristics determine its simple flow path and small resistance, making it particularly suitable for regulating fluids with high pressure drop, high viscosity, suspended solids, and granular substances. The pneumatic diaphragm angle control valve has a right-angle valve body and a single-guided valve core. Its simple valve body flow path and small resistance make it especially suitable for regulating fluids with high viscosity, suspended solids, and granular media, and it can prevent coking, adhesion, and blockage. The pneumatic diaphragm angle control valve adopts a top-guided structure, composed of a multi-spring pneumatic diaphragm actuator and an angle control valve body. It has the advantages of compact structure, light weight, sensitive operation, streamlined fluid channel, small pressure drop loss, large valve capacity, accurate flow characteristics, and easy disassembly and assembly.
II. Product Selection:
1. Pneumatic angle control valve valve core shape and structure: Mainly determined by factors such as the selected flow characteristic and unbalanced force.
2. Wear resistance: When the fluid medium is a suspension containing high-concentration abrasive particles, the internal materials of the valve must be hard.
3. Corrosion resistance: Since the medium is corrosive, it is advisable to select valves with a simple structure as much as possible.
4. Medium temperature and pressure: When the medium temperature and pressure are high and fluctuate greatly, valves whose valve core and seat materials are less affected by temperature and pressure changes should be selected. When the temperature is ≥250℃, a radiator should be added.
III. Technical Parameters:
Nominal Pressure | Standard products: 1.6, 4.0, 6.4MPa; Special orders: 10, 22, 32MPa |
Valve Core Type | Single-seat plunger valve core |
Flow Characteristic | Linear, equal percentage |
Action Type | Air-to-open, air-to-close |
Working Temperature | Standard type: -40～230℃; Radiator type: 230～450℃; Special orders: 450～600℃ |
Flange Standard | Complies with JB78-59 and JB79-59 standards; can be manufactured according to JB/79.1-94, JB/79.2-94, ANSI, JIS, DIN, etc. upon special order |
Actuator | ZHA/B type multi-spring pneumatic diaphragm actuator |
Optional Accessories | Positioner, solenoid valve, air filter regulator, limit switch, valve position transmitter, emergency device, handwheel mechanism, etc. |
IV. Parts Materials:
Part Name | Material | Temperature Range |
Valve body and upper valve cover | HT200 | -20～200℃ |
ZG230-450 | -40～450℃ | |
ZG1Cr18Ni9Ti | -250～550℃ | |
ZG0Cr18Ni12Mo2Ti | -250～550℃ | |
Valve core, valve seat | 1Cr18Ni9 | -250～550℃ |
0Cr18Ni12Mo2Ti | -250～550℃ | |
Packing | Polytetrafluoroethylene (PTFE) | -40～200℃ |
Diaphragm | Nitrile rubber reinforced with polyester fabric | |
Compression Spring | 60Si2Mn | |
Diaphragm Cover | A3 |
V. External Dimensions:
Nominal Diameter (mm) | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | |
L (mm) | PN1.6MPa | 85 | 95 | 115 | 115 | 130 | 145 | 155 | 175 | 200 | 240 | 300 |
PN4.0MPa | 85 | 95 | 115 | 115 | 130 | 145 | 155 | 175 | 200 | 240 | 300 | |
PN6.4MPa | 100 | 115 | 130 | 130 | 150 | 170 | 190 | 215 | 250 | 275 | 325 | |
H (mm) | Standard Type | 413 | 421 | 449 | 468 | 463 | 584 | 623 | 658 | 766 | 796 | 801 |
Radiator Type | 543 | 551 | 579 | 598 | 593 | 747 | 786 | 821 | 965 | 995 | 1000 | |
D (mm) | 285 | 360 | 470 | |||||||||
Weight (KG) | 24 | 33 | 36 | 37 | 41 | 76 | 86 | 104 | 174 | 212 | 310 | |
| Machinery & Equipment/Valves/Control Valves | |
