EA6001 Pump Suction Type Four-in-one Gas Detector
Contact Info
- Room 503, Building 17, Huafeng International Intelligent Manufacturing City, Wanle Road, Shajing Sub-district, Bao'an District, Shenzhen, 518000
- 池工
- 17796309110
- 17796309110@163.com
★Can detect 1 to 4 types of gases simultaneously, with free unit switching
Available units: PPM, mg/m³, Vol%, LEL%, PPHM, ppb, mg/L.
★Built-in pump suction measurement, integrated water vapor and dust filters to prevent damage to sensors and the device from water vapor and dust; suitable for high-humidity and high-dust environments with rapid response; special gas path design enables sampling distance over 10 meters, and can directly detect gases under negative or positive pressure ranging from -0.5 to 2 kg
★Rich human-machine interface
2.31-inch high-definition color screen displays real-time concentration, alarm, time, temperature, humidity, storage and other information; the menu interface uses high-definition simulation graphics to show the function names of each menu.
★Large-capacity data storage (capacity customizable), supports multiple storage methods, optional RS485 communication
Standard configuration has a data storage capacity of 100,000 entries; supports real-time storage, timed storage, or only storing alarm concentration data; allows local viewing and deletion of data, and uploading to a computer via USB interface for data analysis or printing.
★High-temperature gas detection (optional)
Optional high-temperature sampling cooling filter handle or high-temperature and high-humidity pretreatment system can detect flue gas at temperatures up to 400°C. For gas detection at higher temperatures, customization is available.
★Three display modes can be switched Simultaneously display concentrations of four gases, large-font cyclic display of single-channel gas concentration, real-time curve display.
★Graphical display, reflecting the trend of gas concentration changes over a period of time in the form of curves
●Data recovery function: in case of misoperation, you can choose to recover part or all of the data
●Can set whether to display maximum, minimum, and average values
●Standard USB charging interface, with charging protection function, supports hot-swapping of USB, and the device can work normally while charging
●Adopts a 4500mA large-capacity rechargeable polymer lithium battery, enabling long-time continuous operation
●High-precision temperature and humidity measurement (optional)
●Supports real-time detection or timed detection; when not detecting, the pump can be turned off to extend operating time
●Multiple alarm methods, with all-round three-dimensional indication of alarm status
Includes audible and visual alarm, vibration alarm, and display visual alarm.
Alarm types include: concentration alarm, under-voltage alarm, and fault alarm.
●Multiple alarm mode settings: low alarm, high alarm, interval alarm, weighted average alarm
●Misoperation recognition function: automatically recognizes and prevents misoperation during concentration calibration, avoiding problems caused by human factors
●Automatic zero point tracking, not affected by zero drift during long-term use
●Multi-level calibration at target points, ensuring linearity and accuracy of measurement
●Chinese and English interface can be selected
●Wide operating temperature: -40～+70℃, supports temperature compensation
●Log recording Records calibration logs, maintenance logs, fault resolution measures, sensor life expiration reminders, and next concentration calibration time reminder function.
●Meets the design requirements of intrinsically safe circuits, with anti-static and anti-electromagnetic interference capabilities.
●Protection grade reaches IP65, with splash-proof, dust-proof, explosion-proof, and shock-proof properties.
| Detectable Gases | Toxic gases, oxygen, carbon dioxide, flammable and explosive gases, TVOC, etc., with 1 to 4 types of gases freely combinable. Optional: temperature and humidity measurement. | ||||
| Application Scenarios | Petroleum, chemical industry, pharmaceuticals, environmental protection, gas distribution, warehousing, flue gas analysis, air governance, and all other scenarios requiring portable rapid gas concentration detection. | ||||
| Detection Range | 0～1, 10, 100, 1000, 5000, 50000, 100000ppm, 200 mg/L, 100%LEL, 20%, 50%, 99.999%, 100%Vol are optional, and other ranges can be customized. | ||||
| Resolution | 0.01ppm or 0.001ppm (0～10 ppm); 0.01ppm (0～100 ppm), 0.1ppm (0～1000 ppm), 1ppm (above 0～1000 ppm), 0.01 mg/L (0～200 mg/L), 0.1%LEL, 0.01%, 0.001%Vol. | ||||
| Detection Principle | Electrochemical, catalytic combustion, infrared, thermal conductivity, PID photoionization, etc., depending on gas type, measurement range, on-site environment, and user requirements. | ||||
| Sensor Lifespan | 2～3 years for electrochemical principle, 2 or 6 years optional for oxygen, 5～10 years for infrared principle, 3 years for catalytic combustion, 5 years for thermal conductivity. | ||||
| Detection Accuracy | ≤±3%F.S (higher accuracy available upon customization) | ||||
| Linearity | ≤±2% | Repeatability | ≤±2% | Uncertainty | ≤±2% |
| Response Time | T90≤20 seconds | Recovery Time | ≤30 seconds | ||
| Operating Environment | Temperature: -40℃～+70℃, Humidity: ≤10～95%RH; built-in filter enables use in high-humidity or high-dust environments | ||||
| Sample Gas Temperature | -40℃~+70℃; optional high-temperature sampling cooling filter handle can detect flue gas concentration at 400℃ or higher temperatures | ||||
| Temperature and Humidity Measurement | Optional: Temperature -40℃~+70℃, accuracy 0.5℃; Humidity 0～100%RH, accuracy 3%RH | ||||
| Power Supply | 3.6VDC, 4500mA large-capacity rechargeable polymer lithium battery | ||||
| Display Method | 2.31-inch high-definition color screen | ||||
| Detection Method | Built-in pump suction measurement, flow rate 500 ml/min | ||||
| Alarm Methods | Audible and visual alarm, vibration alarm, visual alarm, audible+visual+vibration alarm, alarm shutdown can be set | ||||
| Communication Interface | USB (for charging and communication), optional RS485 communication interface | ||||
| Data Storage | Standard configuration has a data storage capacity of 100,000 entries | ||||
| Protection Grade | IP65 | ||||
| Explosion-proof Type | Intrinsically safe type | ||||
| Explosion-proof Mark | Exia II CT6 | ||||
| External Dimensions | 160×70×28mm (Length×Width×Height) | ||||
| Weight | 300g | ||||
| Standard Accessories | Instruction manual, certificate of conformity, USB charger (including data cable), high-grade aluminum alloy instrument case, 1 humidity and dust filter | ||||
| Optional Items | Temperature and humidity measurement function, 1.2m extendable sampling handle (1-10m hose, standard length 1m), high-temperature sampling cooling filter handle, high-temperature and high-humidity pretreatment system, multiple humidity and dust filters, lanyard | ||||
| Instruments & Meters/Analytical Instruments/Gas Analyzers | |
