High-voltage line operation anti-electric shock alarm

Product aliases: Near-electric induction alarm, high-voltage line operation anti-electric shock alarm, high-voltage anti-electric shock near-electric alarm, high-voltage anti-electric shock near-electric alarm,

Last summer, at a municipal construction site, when a crane was rotating under a high-voltage line, the operator did not notice that the crane boom had approached the 110kV transmission line above. Instantly, the electric arc pierced the air, the crane tire burst into flames, the operator was severely burned, the surrounding area was powered off for more than 4 hours, and the direct economic loss was millions of yuan. Similar accidents are not isolated cases - according to statistics, electric shock accidents caused by large machinery touching high-voltage lines are common in fields such as power construction, road construction, and garden maintenance every year, and every "carelessness" may cost a life.

When working under high-voltage lines, the safe distance is the lifeline. However, the construction site environment is complex, the driver's field of vision is limited, and it is often unreliable to judge solely based on experience. How to shift from "passive response" to "active early warning"? TLKS-PLSBHigh-voltage line operation anti-electric shock alarm provides the answer.

I. Real-time monitoring, alarm before danger arrives

TLKS-PLSBHigh-voltage line operation anti-electric shock alarm is like an indefatigable "electronic sentry", specially designed for various vehicles working under high-voltage lines. It uses high-voltage electromagnetic induction technology, and the detection unit continuously captures changes in the electromagnetic field around the high-voltage line. When the working vehicle approaches the danger range, the system immediately triggers a voice alarm - "High voltage danger, please keep a safe distance", reminding the operator to stop the operation and adjust the position in time. It is not post-event remedy, but early resolution.

II. Multiple technologies to ensure accurate early warning without omission or error

The electromagnetic interference at outdoor high-voltage sites is strong, and ordinary equipment is prone to false alarms or missed alarms. TLKS-PLSBHigh-voltage line operation anti-electric shock alarm adopts digital filtering anti-interference technology, which effectively filters out stray signals and only responds to the characteristic frequency of high-voltage lines. At the same time, it is equipped with 2.4G wireless communication, and the transmission between the detection unit and the main unit can reach up to 200 meters without obstruction, adapting to open construction site environments. The device supports flexible adaptation to voltage levels from 10kV to over 500kV, and one set of equipment can meet the needs of different lines. It also has a self-check function to regularly check the operating status, ensuring that the equipment will not fail at critical moments.

III. Simple installation, no burden for each vehicle

Different vehicles vary greatly, and large-scale modification is not practical. TLKS-PLSBHigh-voltage line operation anti-electric shock alarm does not require "surgery" on the working vehicle; just fix the detection unit and the main unit directly to use. The transmitting end and the receiving end support pairing, and multiple vehicles working at the same time will not interfere with each other. The whole device weighs only 2.5 kilograms, easy to carry and install, does not increase the operation burden, and ordinary workers can complete the deployment in a few minutes.

IV. Core parameters overview

(1)Applicable line range: 10KV - 500KV

(2)Operating frequency: 50HZ

(3)Operating voltage: DC12V

(4)2.4G communication effective distance: 200m

(5)Detection method: High-voltage electromagnetic induction

(6)Alarm method: Voice alarm

(7)Product weight: 2.5KG

(8)Service life: 5 - 8 years

V. Upgrade safety, make work more reassuring

TLKS-PLSBHigh-voltage line operation anti-electric shock alarm, with precise perception, reliable performance and simple operation, directly targets the pain points of working under high-voltage lines. It is not just a piece of equipment, but also an invisible safety barrier. With the continuous advancement of power engineering and urban construction, near-electric operation scenarios will only increase. Using technical means to make up for human negligence is the most direct and effective way to reduce the accident rate. In the future, this device will also iterate towards a smarter and more adaptable direction, guarding the safe return home of every front-line worker.

Product specifications can be customized according to customer needs, quotations are based on market conditions, and the specific price is subject to telephone negotiation. For more product details, please contact Manager Li of Telink Technology, phone/WeChat: 18820479231.