Low-temperature-resistant laser displacement sensor
Contact Info
- ,
- 王先生
- 18910132037
- 1322188373@qq.com
FTM-CryogenicLaser Displacement Sensor
I. ProductIntroduction:
The FTM-cryogenic laser displacement sensor is a long-range laser displacement sensor developed and produced by Beijing Feituo Xinda Laser Technology Co., Ltd. It has a large measuring range and high accuracy, with a maximum accuracy of ±1mm.
The FTM-cryogenic laser ranging sensor is equipped with rich industrial data interfaces (RS232, RS485, RS422, TTL, 4~20mA, etc.) and ultra-strong anti-interference ability. It is widely used in various industrial control fields such as iron and steel industry, metallurgical industry, automobile industry, printing industry, food industry and various field monitoring and detection sites.
1. Measure the distance of various objects with a reflector;
2. The optical filter can measure high-temperature measured objects;
3. The explosion-proof box can be used in explosion-proof environments;
4. The swing motor can be used for 2D contour measurement.
III. Performance Indicators
Laser characteristics: Red laser diode.
Wavelength: 620nm~6
Laser class: Class 2.
Spot type: Dot or line.
Spot size: 3mm dot spot @10m, 3mmX1
Output power: Less than 1 milliwatt.
2. Electrical Parameters
Working voltage: 5V~24V.
Current: Less than 170 milliamps.
Output format: Digital quantity RS232, RS485 or RS422, analog quantity 4~20mA.
3. Mechanical Parameters
Shell material: Aluminum alloy coated or plastic sprayed.
Window: Glass window.
Wiring method: Aviation plug or reserved 1m cable.
4. Environmental Parameters
Protection level: Waterproof and dustproof, IP65 rating, in accordance with IEC529 standard.
Storage temperature: -40℃~+80℃.
IV.Technical Parameters
1. Detection range: 0.05~200m (customizable);
2. Accuracy: ±1mm;
3. Resolution: 1mm;
4. Sampling frequency: 2Hz~10Hz;
5. Working temperature: -40℃~+50℃;
7. Working voltage: DC 5V~24V;
8. Power consumption: 1.5W;
9. Output format: RS232, RS485, 4~20mA, 0~5V, 0~10V, PNP (choose any one);
10. Spot diameter: 10mm@30m;
11. Overall dimensions: 25*53*93mm.
V.Maintenance
1.Clean and keep dry.
2.Blow off the dust on the mirror surface.
3.Do not touch the lens with your fingers.
4.Only use a clean soft cloth to wipe. If necessary, you can use pure alcohol or water to wipe with a damp cloth.
5.If the instrument is accidentally wet, do not expose it to the sun, let it air dry.
6.Turn off the power if you don't use it for a long time to avoid affecting the service life.
| Electronic Components & Supplies/Sensors/Displacement Sensors | |
