digital måler for retthet av kontaktledninger med digital visning
Contact Info
- Adresse:, Postnr:
- Kontakt: 王先生
- Tlf:18910132037
- E-post:1322188373@qq.com
Andre produkter
FTJP-3-type digital display contact line flatness measuring instrument
The digital display contact line flatness measuring instrument can measure the flatness of the conductor, and it can measure by itself without manual reading.
Display data unit: mm
Current status: The current operating status of the device
A: Real-time level of the contact line
B: Real-time displacement of the contact line
C: Displacement variation of the contact line
Technical parameters
1) Measuring range: 1000mm
2) Measuring accuracy: Grade 0
3) Applicable range: Suitable for various contact wires
Measuring process
1. Place the contact line in the slot of the device.
2. Turn on the power switch of the device.
3. After the system starts, the current status is "Initializing".
4. Wait for the initialization to complete, when the prompt "Ready" appears, you can perform the measurement operation.
5. Press and hold the key for 3 seconds, the current status will change to "Start Measurement", and then enter the measurement mode to measure the contact line.
6. After the measurement is completed, press and hold the key for 3 seconds, the current status will change to "Measurement End".
Calibration process
1. Place the device on a horizontal surface.
2. Place a measuring block with a thickness of 1cm at the measuring position of the device.
3. Start the device.
4. Press and hold the key for 4 seconds in the initialization state, and the prompt "Calibration Completed" will appear.
| Bransjekategori: | Instruments & Meters/Measuring Instruments/Other Measuring Instruments |
|---|---|
| Produktkategori: | |
| Merke: | |
| Spesifikasjoner: | |
| Lager: | |
| Opprinnelse: |
