Anti-Slip Tester BOT-3000E Dynamic Friction Coefficient Tester complies with ANSI A326.3 standard.

Features:

• Advanced portable device, advanced digital technology, large color display, sealed switches.

• Capable of measuring the slip resistance characteristics of the most common indoor flooring or walkway surfaces

• Complies with ANSI A137.1 standard test methods

• Single-board camera to accurately record precise test locations

• Time/date stamped test results printed on thermal paper

• Leather, Neolite, SBR rubber, or other custom sliders available for wet and dry surface testing

• Includes a rugged Pelican™ brand waterproof and shockproof travel case

• USB port for transferring test results (with embedded photos) to any PC or MAC

• On-screen graphs assist in analyzing surface conditions

• Includes rechargeable battery pack and charger

The BOT-3000E is the third-generation design product from Regan Scientific Instruments and is recognized worldwide as an advanced, portable digital friction and wear testing machine. The device continues to utilize the automated drag sled principle originally established in Germany by prominent scientific researchers. It has been meticulously designed to avoid premature wear or mechanical fatigue caused by springs, actuators, dials, weights, or other components. It can export a stable test result (in PDF format) based on data collected by the machine after testing.

This device accurately measures the Static Coefficient of Friction (SCOF) and Dynamic Coefficient of Friction (DCOF) on both wet and dry surfaces. It is primarily used for flooring in public spaces and indoor areas, but it can also determine the slip resistance of other materials such as paint, wax, other flat metal coatings, plastics, wood, laminates, concrete, and stone surfaces.

BOT-3000E Product Dimensions

Test Types: Wet, Dry, SCOF, DCOF

Effective Sensor (Slider) Types: Leather, Neolite, SBR, Custom

Device Dimensions: 29×20×17 cm

Weight: 6.9 kg

Measurement Speed (DCOF): 20 cm/s +/-5%

Measurement Range: 0.01-1.00 μ

Measurement Axial Force: 21.3 N +/-1%

Footprint Area: 3 mm × 28 mm

Measurement System Tolerance: 2%

DCOF Measurement Distance: 10-50 cm in 5 cm increments (displays 4"–20")

Maximum Incline Angle: 9.6 degrees (with deviation)

Verification Mass: 1.36 kg

Operating/Storage Temperature: 5–40°C

Operating/Storage Humidity: 5–90% relative humidity (non-condensing)

Internal Memory: 1000+ measurements

Display: 262K colors, backlit, 480×272 LCD TFT display

Test Data Storage/Transfer: USB flash drive (FAT32 format)

Transfer File Formats: PDF, TXT/CSV (.LOG file)

Printer: Thermal, 48 mm wide, 8 dots/mm

Processor Type: ARM Cortex M4 32-bit processor, 120 MHz

RAM: 128 MB DDR2

Sampling Rate: 1000 samples/second

Protection Level: IP20

Power Supply: RSI battery pack (NiMH battery, 12V, 3.8 Ah)

Battery Charger: 120–240 VAC 50/60 Hz input circuit, UL listed

Charging Time: Approximately 12 hours when fully depleted

Camera (Front-Facing): 1 megapixel, fixed focus

Thermal Output Information: Test method, last calibration and verification date, sensor (slider) information, distance (DCOF), test results (min, avg, and max readings), temperature and humidity, device and location codes

PDF Report Information: Test method, last calibration and verification date, sensor (slider) information, distance (DCOF), photo, test results (min, avg, and max readings), temperature and humidity, device and location codes