IEC 60335 Surface Temperature Probe | Surface Temperature Rise Probe
Contact Info
- Add:宝安区45区鸿都商务大厦C栋505室, Zip:
- Contact: 于沈洋
- Tel:13554997271
- Email:bnd015@szbonad.com
Other Products
Product Name: Surface Temperature Measurement Probe, Surface Temperature Rise Probe
Product Model: BND-WD
I. Product Overview:
The surface temperature measurement probe is designed and manufactured to meet the requirements of IEC 60335 and GB 4706 standards. It is primarily used to test the temperature rise on the accessible front and side surfaces of electric stoves and ovens. According to relevant standards, the surface temperature measurement probe includes a 4N thrust force.
Main Technical Parameters
Copper Disc | Brass, diameter 5mm, thickness 0.5mm |
Thermocouple | USA OMEGA K-type thermocouple, diameter 0.3mm |
Insulation Tube | Polycarbonate, inner diameter 3mm, outer diameter 5mm |
Handle | POM, with 4N thrust force |
II. Usage Instructions:
1. This test should be conducted after completing the test corner experiment.
2. Measure when the appliance has been operating for 60 minutes or has reached a stable state.
3. Press the probe tip against the surface of the appliance under test and apply a 4N thrust force until the temperature stabilizes.
III. Precautions:
1. Do not adjust the thrust force arbitrarily. If adjustment is necessary, calibrate using an instrument with a resolution accuracy of at least 0.5N.
2. As the test probe is a precision product, handle it with care during use and store it properly.
| Industry Category | Security & Protection |
|---|---|
| Product Category | |
| Brand: | BONAD |
| Spec: | BND-WD |
| Stock: | 999 |
| Manufacturer: | |
| Origin: | China / Guangdong / Shenshi |
