Standard Test Finger No. 11 with Wire for Rigidity Test

Basic Introduction:
1. Manufactured in accordance with GB4706.1, GB/T16842, GB2099.1, and relevant clauses of IEC61032, UL, etc.

2. The test probe is an essential instrument for conducting electric shock protection tests for household and similar electrical appliances.
How to Use the Test Probe
1. Connect one end of a power supply (not less than 40V and not more than 50V) in series with a light bulb to the wire of the test probe (or pin, rod), and connect the other end to the sample under test;
2. Bring the test probe (or pin, rod) into contact with the sample as specified. If the light bulb lights up, it is considered unqualified; otherwise, it is qualified.

Probe No. 11 (Test Probe)

Product Overview: Complies with IEC61032 Figure 7 Test Probe 11, GB/T16842 Test Probe 11, GB8898, IEC60065, IEC60598, GB7000, IEC60335, GB4706, and other standard requirements.

Used to inspect the prevention of human contact with live parts and can also be used to check the mechanical strength of openings in enclosures or internal barriers within enclosures.

● Customizable with 10–50N thrust

● Customizable with 10–75N thrust

● Customizable with 5–30N thrust

Technical Parameters:

Probe Diameter: 12 mm

Probe Length: 80 mm

Barrier Diameter: 50 mm

Barrier Length: 100 mm