125mm thick large panel test finger complies with Clause 8.1.1 of GB4706.1-2005.

Complies with standards:

Manufactured according to Clause 20.2 of GB 4706, using a test probe similar to Type B in IEC61032, but with a circular baffle of 125mm diameter replacing the non-circular baffle.

Product Overview:

A test probe similar to Type B in IEC61032 is applied with a force not exceeding 5N to determine compliance. However, this test probe features a circular stop plate with a diameter of 125mm, replacing the original non-circular stop plate.

For appliances with movable devices such as those that adjust belt tension, the test probe test shall be conducted with these devices adjusted to the most unfavorable positions within their adjustable range. Remove the belt if necessary.

The test probe must not be able to touch hazardous moving parts.

Technical Parameters:

Finger diameter: 12 mm

Finger length: 80mm (total length of three sections)

Baffle diameter: 125mm

Handle length: 100mm

Reference standards: GB4706.1-2005 Clause 8.1.1, IEC61032:1997 Figure 2, IEC60335-2-14, GB4706, etc.