IEC60529 standard IP40, non-thrust test probe with a diameter of 1mm, Type D test probe rod.

This wire is a test tool used to verify the prevention of human contact with hazardous parts.

This test tool is also used for protection verification to prevent contact by handheld wires.

 1. Manufactured in accordance with relevant clauses of GB/T4208-2008, IEC61032:1997, IEC60529:2001, and UL.

 2. The Type D test probe (Type D test pin) is an essential instrument for conducting electric shock protection tests for household and similar electrical appliances.

 Technical Parameters:

 1. Probe length: 100mm 

 2. Probe diameter: 1mm 

 3. Stop ball diameter: 35mm

 4. Handle diameter: 10mm 

 5. Handle length: 100mm

 6. According to IEC61032 Figure 4 (Test probe D) and GB/T4208-2008 Table 6 (first characteristic numeral 4/5/6). 

 Usage Method:

The jointed part of the standard test finger must not contact live parts or approach hazardous parts, and the 35mm circular guard must not enter.

In tests for preventing access to hazardous parts, the Type D test probe must be applied with a thrust of 1±0.1N.