IEC60529 standard IP30, without thrust, 2.5mm diameter test probe, Type C test probe.

Type C Test Probe (IP3X Test Probe)

 I. Basic Introduction: 

1. Manufactured in accordance with the relevant clauses of GB/T4208-2008, IEC61032:1997, IEC60529:2001, and UL standards. 

2. The Type C test probe (Type C test pin) is an essential tool for conducting electric shock protection tests for household and similar electrical appliances.

 II. Technical Parameters: 

1. Probe length: 100mm 

2. Probe diameter: 2.5mm 

3. Stop ball diameter: 35mm 

4. Handle diameter: 10mm 

5. Handle length: 100mm 

6. Based on IEC61032 Figure 3 (Test probe C) and GB/T4208-2008 Table 6 (Characteristic numeral 3).

 III. Usage Method:

The joint part of the standard test finger must not touch live parts or approach hazardous parts, and the 35mm circular baffle must not enter. In tests to prevent access to hazardous parts, Type C and D test probes must be applied with a thrust of 3±0.3N or 1±0.1N. Note: For products without thrust, please use with a push-pull force gauge.