Red High-Voltage Insulation Mat

Insulating rubber sheets, insulating rubber boards, and insulating rubber mats are widely used in substations, power plants, distribution rooms, testing rooms, and outdoor live working operations. They are primarily made from rubber-based insulating materials. The upper and lower surfaces of the insulating mat should not have harmful irregularities, which refer to one of the following characteristics: defects that destroy uniformity, damage the smooth surface profile, such as small holes, cracks, local bulges, cuts, embedded conductive foreign objects, folds, voids,凹凸波纹 (uneven波纹), and casting marks. Harmless irregularities refer to surface irregularities formed during the production process. The specific details are as follows:

1.Method:

Widely used in substations, power plants, distribution rooms, testing rooms, and outdoor live working operations.

Should be stored in a dry and ventilated environment, away from heat sources, and at least 20cm above the ground and walls. Avoid contamination by acids, alkalis, and oils. Do not store outdoors to prevent direct sunlight exposure.

2.15KV Insulating Rubber Sheets, Insulating Rubber Boards, Insulating Rubber Mats

(1). Overview of 15KV Insulating Rubber Sheets, Insulating Rubber Boards, and Insulating Rubber Mats:

①. Introduction: Enhances the insulation between workers and the ground, made from special rubber. Insulating rubber sheets are also known as insulating rubber boards, insulating rubber mats, insulating blankets, etc. They are rubber mats with high volume resistivity and resistance to electrical breakdown, made from non-polar rubbers with excellent insulating properties such as NR, SBR, and IIR. Used as desktop or floor insulating materials in work environments like power distribution.

②. Appearance: Spots or unevenness: depth or height must not exceed the thickness tolerance of the rubber mat; bubbles: no more than 5 bubbles per square meter with an area less than 1cm², and the distance between any two bubbles should be at least 40mm; impurities: depth and length should not exceed the thickness of the rubber mat and should be at least 40mm; uneven edges or sponginess: width should not exceed 10mm, length should not exceed 1/10 of the total length of the rubber mat; cracks: not allowed. (2). National standards for insulating rubber sheets, insulating rubber boards, and insulating rubber mats: Serial number Item Cycle Requirement Description 1 Power frequency withstand voltage test 1 year Voltage level Power frequency withstand voltage kV Duration min For use in live equipment areas High voltage 15 1 Low voltage 3.5 1 During the test, wet cloth or metal foil should be placed on the upper and lower surfaces of the insulating rubber sheet, insulating rubber board, or insulating rubber mat, and should be 200mm smaller than the四周 (perimeter) of the tested item. The voltage should be increased continuously and uniformly to the value specified in Table 8, maintained for 1min, and observed for any breakdown. If there is no breakdown, the test is passed. When testing in segments, the edges of the two segments should overlap.

(3). Characteristics of 15KV insulating rubber sheets, insulating rubber boards, and insulating rubber mats: Good physical and mechanical properties, excellent insulating performance, can operate in dry air environments with high dielectric requirements between -35~+100°C. Tested at 43KV, normally operates at 660V. Widely used in substations, power plants, distribution rooms, testing rooms, and outdoor live working operations. Should be stored in a dry and ventilated environment, away from heat sources, and at least 20cm above the ground and walls. Avoid contamination by acids, alkalis, and oils. Do not store outdoors to prevent direct sunlight exposure.

Standard configurations for insulating rubber sheets, insulating rubber boards, and insulating rubber mats:

(1) 5KV insulating rubber sheets, insulating rubber boards, insulating rubber mats Thickness: 3mm Specific gravity: 5.8KG/m² Color: red, green, black

(2) 10KV insulating rubber sheets, insulating rubber boards, insulating rubber mats Thickness: 5mm Specific gravity: 9.2KG/m² Color: red, green, black

(3) 15KV insulating rubber sheets, insulating rubber boards, insulating rubber mats Thickness: 5mm Specific gravity: 9.2KG/m² Color: red, green, black

(4) 20KV insulating rubber sheets, insulating rubber boards, insulating rubber mats Thickness: 6mm Specific gravity: 11KG/m² Color: red, green, black

(5) 25KV insulating rubber sheets, insulating rubber boards, insulating rubber mats Thickness: 8mm Specific gravity: 14.8KG/m² Color: red, green, black

(6) 30KV-35KV insulating rubber sheets, insulating rubber boards, insulating rubber mats Thickness: 10mm 12mm Specific gravity: 18.4KG/m² 22 KG/m² Color: red, green, black