Specification selection for computer room insulating blankets

Insulation mats can be custom-made in different sizes, colors, and with different text according to customer requirements for safe construction insulation mats.

Insulation rubber sheets are rubber sheets with high volume resistivity and resistance to electrical breakdown. Made from non-polar rubbers with excellent insulation properties such as NR, SBR, and IIR. Used as tabletop or floor insulation materials in work environments such as power distribution.
National Standard: This product is mainly suitable for substations, power plants, distribution rooms, etc.

Insulation rubber sheets are rubber sheets with high volume resistivity and resistance to electrical breakdown. Made from non-polar rubbers with excellent insulation properties such as NR, SBR, and IIR. Used as tabletop or floor insulation materials in work environments such as power distribution.

National Standard: For distribution room voltage of 10KV, choose 8mm thickness, power frequency withstand voltage test 10000V for 1 minute without breakdown.

For distribution room voltage of 35KV, choose 10-12mm thickness, power frequency withstand voltage test 15000V for 1 minute without breakdown.

For low voltage in distribution rooms, choose 5mm thickness, below 500V, power frequency withstand voltage test 3500V for 1 minute without breakdown.

Selection of Specifications for Computer Room Insulation Blankets

Technical Parameters of Insulation Rubber Mats

1. Classified by withstand voltage level:

★★5kv【Insulation Rubber Mat】

Technical parameters: thickness 3mm; colors red, black, green; specific gravity: 5.8KG/m2

★★15KV【Insulation Rubber Mat】

Technical parameters: thickness 5mm; colors red, black, green; specific gravity: 9KG/m2

★★20KV【Insulation Rubber Mat】

Technical parameters: thickness 6mm; colors red, black, green; specific gravity: 11KG/m2

★★25KVInsulation Rubber Mat

Technical parameters: thickness 8mm; colors red, black, green; specific gravity: 14.5KG/m2

★★30KVInsulation Rubber Mat

Technical parameters: thickness 10mm; colors red, black, green; specific gravity: 18KG/m2

★★35KVInsulation Rubber Mat

Technical parameters: thickness 12mm; colors red, black, green; specific gravity: 21.6KG/m2

2. Classified by color:

◆RedInsulation Rubber Mat

◆BlackInsulation Rubber Mat

◆GreenInsulation Rubber Mat

3. Classified by thickness:

●3mm, 5mm, 6mm, 8mm, 10mm, 12mm

Application Range and Storage Method of Insulation Rubber Mats

Insulation rubber mats are widely used in substations, power plants, distribution rooms, test rooms, and outdoor live work.

They should be stored in a dry and ventilated environment, away from heat sources, and at least 20cm above the ground and walls. Avoid contamination by acids, alkalis, and oils. Do not store outdoors to avoid direct sunlight.

1. Our company's products are made from non-polar pure rubber with excellent insulation properties such as NR and SBR.

2. Our company's products do not contain inferior rubber, waste rubber, recycled rubber, or any plastic components.

3. Stable surface resistance and volume resistance, high specific gravity per unit area, good flatness, and stable physical properties.

4. Our company's products are resistant to acids, alkalis, oils, and high temperatures. The color scheme is elegant and aesthetically pleasing, and the power frequency withstand voltage meets national standards.

Performance of Our Company's Insulation Rubber Mats

☞No more than 5 bubbles per square meter of 1cm2, distance between any two bubbles not less than 40mm, no cracks.

☞Elongation at break ≥250%, no deformation.

☞Heat aging in air at 70°C for 72 hours.

☞Water absorption ≤1.5%.

☞Power frequency withstand voltage effective value >15KV, maintained for 3 seconds without breakdown.

☞Smooth appearance, no unevenness, good elasticity.