Aluminum alloy removable rodent barrier for power plant grain warehouse

Material of the Rodent Barrier

The product is custom-made from high-strength aluminum alloy, offering high visibility and practicality! The reflective strip on the upper part is professionally made from engineering-grade reflective film, with the reflective film and backing paper being sturdy and durable.

Structure of the Rodent Barrier

This product consists of a central barrier plate, two clamping slots on both sides, and 4 expansion nails.

Detailed Specifications

The height of the clamping slot is the same as the barrier plate height, typically 500mm, and can be customized according to customer requirements! The plate thickness is 0.6mm or 0.8mm, with the finished main plate thickness being 25mm. The length is determined by the specific width of the door where it will be used! Each set of the rodent barrier comes with 4 expansion nails required for installation.

Method for Determining the Length of the Rodent Barrier

The length of the rodent barrier is determined by the width of the door where it will be used. When placing a custom order, customers need to accurately measure the width of the walls on both sides of the door to ensure precise data.

Surface Treatment of the Rodent Barrier

The surface of the rodent barrier is hard and aesthetically pleasing. A yellow and black reflective strip is attached 50mm above the barrier plate, which reflects light under illumination or other light sources, serving as a warning to people and facilitating entry and exit!

Installation Method of the Rodent Barrier

Installing the rodent barrier is very simple. First, insert the expansion nails through the installation holes on the clamping slots. Then, fix the clamping slots on both sides along the door frame, parallel to the expansion nails, onto the walls on either side of the door frame. The clamping slots are now successfully installed! When in use, slide the rodent barrier into the clamping slots along their inner diameter to prevent rats from entering! When not in use, remove the rodent barrier. The clamping slots fixed on the wall do not affect the normal opening and closing of the door and do not need to be removed.

Precautions for the Rodent Barrier

This product is custom-made from high-strength aluminum alloy. Avoid heavy impacts during normal use. When not in use, store it in a safe place and keep it properly!