Low-Shrinkage Condensation Silicone Rubber Cement Wall Tile Mold Special

Low Shrinkage Condensation Type Silicone Rubber for Cement Wall Tile Molds   For silicone rubber inquiries, contact Ms. Chen at 13662816580 (same number for WeChat)

• Usage Instructions
  • Preparation: Clean the prototype of the cement wall tile component to be replicated and apply a release agent to ensure the silicone mold can be demolded smoothly.
  • Mixing the Compound: Mix component A and component B of the liquid silicone rubber uniformly according to the specified ratio, such as common ratios of 100:2 or 100:3. The specific ratio depends on the product model.
  • Deaeration Treatment: Place the mixed silicone rubber into a vacuum machine for deaeration to remove air bubbles from the compound, ensuring the quality of the mold.
  • Pouring the Mold: Slowly pour the deaerated silicone rubber into the enclosed prototype mold, ensuring it fully fills all corners of the prototype.
  • Curing and Molding: At room temperature, the silicone rubber will cure over a certain period to form an elastic mold. The curing time is generally 3-5 hours, depending on the ambient temperature and the amount of curing agent added.
  • Demolding and Trimming: After the silicone rubber has fully cured, carefully remove the mold from the prototype, then trim the mold to remove excess silicone, resulting in a mold ready for producing cement wall tile components.