Injection Molding Industrial Motor PES Plastic Blades

Zhanjiang PPO Injection Molding Customization High Utilization Rate Yangchun Industrial Motor PES Plastic Blades

Dongguan Dinghao Plastic Technology Co., Ltd. implements data-driven management for customers in service, with one-on-one quality control throughout the process to ensure timely communication of customer quality needs, providing more attentive and reassuring services. In terms of craftsmanship, we promote process engineers to optimize production processes, reduce factors causing defective products, strengthen quality control, lower production costs and customer transaction costs, achieving a win-win situation. We are dedicated, so customers can rest assured.

Name: Plastic Fan Blade

Model: MPT-00416

Outer Diameter: 130±0.5mm

Inner Diameter: 70±0.5mm

Interface Diameter: 30±0.5mm

Height: 17±0.5mm

Material: PES

Color: Gray

Weight: 20g

Note: The above data is for reference only,

please refer to the actual product,

customization available with provided drawings or samples

Injection Time

The injection time mentioned here refers to the time required for the plastic melt to fill the cavity, excluding auxiliary times such as mold opening and closing. Although the injection time is very short and has little impact on the molding cycle, adjusting the injection time plays a significant role in controlling the pressure of the gate, runner, and cavity. A reasonable injection time helps achieve ideal melt filling and is crucial for improving the surface quality of the product and reducing dimensional tolerances.

Injection time is much shorter than cooling time, approximately 1/10 to 1/15 of the cooling time. This rule can serve as a basis for predicting the total molding time of plastic parts. In mold flow analysis, the injection time in the analysis results equals the injection time set in the process conditions only when the melt is entirely pushed into the cavity by screw rotation. If the screw switches to holding pressure before the cavity is filled, the analysis result will be greater than the set process condition.