Qinhuangdao Vehicle Cooler PES Plastic Fan Blade

Qinhuangdao Vehicle Cooler PES Plastic Fan Blade

Dongguan Dinghao Plastic Technology Co., Ltd. adheres to the product quality philosophy of "Quality Creates the Market." Throughout the production process, we strictly follow the quality management system, rigorously control the quality of each procedure, and provide customers with superior, cost-effective products. We ensure the company's good reputation and create a top-quality image in the industry! Dongguan Dinghao Plastic Technology Co., Ltd. offers a wide variety of products at reasonable prices, earning a high reputation among consumers. The company has established long-term, stable cooperative relationships with numerous retailers and agents.

Name: Plastic Fan Blade

Model: MPT-00416

Outer Diameter: 130±0.5mm

Inner Diameter: 70±0.5mm

Hub Diameter: 30±0.5mm

Height: 17±0.5mm

Material: PES

Color: Gray

Weight: 20g

Note: The above data is for reference only.

Please refer to the actual product.

Customization is available based on provided drawings or samples.

What is the injection time in injection molding?
The injection time referred to here is the time required for the plastic melt to fill the cavity, excluding time for mold opening, closing, etc. A short injection time has a minor impact on the molding cycle, but adjusting the injection time plays a significant role in controlling the pressure at the gate, runner, and cavity. Proper injection time facilitates ideal melt filling and is crucial for improving product surface quality and reducing dimensional tolerances.
Injection time is much shorter than cooling time—approximately 1/10 to 1/15 of the cooling time—and can serve as a basis for predicting the overall molding time of plastic parts. During mold flow analysis, the injection time in the analysis results will match the injection time set in the process conditions only when the melt completely fills the cavity via screw rotation. If screw decompression switching occurs before the mold cavity is fully filled, the analysis result will exceed the set process condition.