ASA plastic parts

Jilin ASA Plastic Parts Direct Sales Manufacturer Heyuan PFA Plastic Mold Production Carefully Selected Raw Materials

Dongguan Dinghao Plastic Technology Co., Ltd. adheres to the principle of credibility and values win-win cooperation with all parties. In recent years, the company has collaborated with numerous enterprises, earning the trust of partners with its good reputation and establishing a positive corporate image. The company's success is attributed to the hard work of all employees and the trust and support of customers in its products. All staff members are united and committed to providing more high-quality products for customers and consumers.

Name: Plastic Part

Model: MPT-00319

Material: Plastic

Length: 120±0.5mm

Width: 95±0.5mm

Height: 60±0.5mm

Top Interface Diameter: 41±0.5mm

Side Interface Diameter: 32±0.5mm

Color: White

Weight: 84g

Note: The above data is for reference only,

Please refer to the actual product,

Customization based on drawings or samples is available

Injection Molding Time

The injection molding time mentioned here refers to the time required for the plastic melt to fill the cavity, excluding auxiliary time such as mold opening and closing. Although the injection time is very short and has little impact on the molding cycle, adjusting the injection time plays a significant role in controlling the pressure of the gate, runner, and cavity. A reasonable injection time helps achieve ideal melt filling and is crucial for improving the surface quality of the product and reducing dimensional tolerances.

Injection time is much shorter than cooling time, approximately 1/10 to 1/15 of the cooling time. This rule can serve as a basis for predicting the total molding time of plastic parts. In mold flow analysis, the injection time in the analysis results equals the injection time set in the process conditions only when the melt is entirely pushed into the cavity by screw rotation. If the screw switches to holding pressure before the cavity is filled, the analysis result will be greater than the set process condition.