PESU Injection Molded Thermometer Housing

Maoming PESU Injection Molded Parts Zhejiang Non-contact Injection Molded Thermometer Shell No Short Shot No Burrs

Dongguan Dinghao Plastic Technology Co., Ltd. provides OEM, ODM production, and accessory supply! With a complete and high-standard quality management system, multiple equipment, exquisite technology, high technical level, and certifications from various industries! Reliable product quality and high cost-effectiveness!

Name: Thermometer Instrument Shell

Model: MPT-00408

Length: 180±0.5mm

Total Width: 140±0.5mm

Diameter: 28±0.5mm

Width: 45±0.5mm

Material: ABS

Color: Yellow

Weight: 140g

Note: The above data is for reference only,

Please refer to the actual product,

Customization available with provided drawings or samples

9 Key Points to Note in Plastic Mold Processing
1. The produced plastic molds must meet customer standards; if drawings are provided, production must strictly follow the drawing requirements, and injection mold processing accuracy should be improved as much as possible to enhance customer satisfaction.
2. Ensure timely completion of customer production requirements; avoid delayed deliveries and strive for fast response, fast production, and fast delivery.
3. During plastic mold processing, pay attention to mold maintenance, especially the outer surface of the mold base, ensuring no defects, dust, rust, etc., and keep it clean.
4. After completing plastic mold processing, continue to maintain the mold; the mold surface must be cleaned and kept tidy.
5. During mold handover and acceptance, follow standardized procedures and relevant inspection forms item by item; packaging and shipment can only proceed after passing inspection.
6. All plastic molds must specify the material used during production, with a material certification list provided. For special materials, include relevant processing parameter reports; for example, if heat treatment reports are available for hard molds, injection mold processing will be more efficient.
7. Any internal molds or mold components must strictly follow production procedures during processing; unauthorized welding or grinding is prohibited.
8. Venting slots must be added at appropriate locations on the outer periphery of plastic mold products, with specifications strictly adhering to the mold designer's standards.
9. If engraving is required on the plastic mold, ensure all fonts are neat, upright, and not distorted.