SUNUSA High-Frequency Series UPS SA1102L

SA1102L

Technical Parameters:

Model: SA1102L

Phase: Single-phase grounding

Capacity: 2000VA/1800W

Input Voltage Range: 110-300VAC at 50% load, 160-280VAC at 100% load

Input Frequency Range: 40Hz~70Hz

Input Power Factor: ≥0.99 at 100% load

Output Voltage: 200/208/220/230/240VAC

Output Voltage Range (Battery Mode): ± 1%

Output Frequency Range (Synchronization Correction Range): 47~53Hz or 57～63Hz

Output Frequency Range (Battery Mode): 50Hz±0.25Hz or 60Hz±0.3Hz

Output Surge Ratio: 3:1

Output Harmonic Distortion: ≤3% THD (linear load), ≤6% THD (non-linear load)

Conversion Time AC to DC: 0ms

Conversion Time Inverter to Bypass: 4 ms (under standard conditions)

Waveform (Battery Mode): Pure sine wave

Mains Mode Efficiency: 88%

Battery Mode Efficiency: 85%

Standard Battery Model: 12V /9AH

Number of Standard Batteries: 4

Maximum Charging Current for Standard Battery: 1.0A (max)

Standard Battery Charging Voltage: 54.7VDC±1%

Long-Run Battery Model: Depends on the applicant

Number of Long-Run Batteries: 6 (specific 4)

Maximum Charging Current for Long-Run Battery: 1A/2A/4A/6A (adjustable)

Long-Run Battery Charging Voltage: 82.1VDC±154.7VDC±1% (specific)

LCD or LED Display: Load size, battery capacity, mains mode, battery mode, bypass mode, fault indication;

Note: Domestic standard is LED display, international is LCD display

Battery Mode Alarm: Beeps once every 4 seconds

Low Battery Alarm: Beeps once every 1 second

Overload Alarm: Beeps once every 1 second

Fault Alarm: Continuous beeping

Standard Unit Dimensions, Depth x Width x Height (mm): 397×145×220

Standard Unit Net Weight (kg): 17