SUNUSA High-Frequency Series UPS SA1110L

SA1110L

Technical Parameters:

Model: SA1110L

Phase: Single-phase grounding

Capacity: 10000VA/9000W

Input Voltage Range: 110-300VAC at 50% load, 176-300VAC at 100% load

Input Frequency Range: 46Hz~54Hz or 56Hz~64Hz

Input Power Factor: ≥0.99 at 100% load

Output Voltage: 208/220/230/240VAC

Output Voltage Range (Battery Mode): ± 1%

Output Frequency Range (Synchronization Correction Range): 46Hz~54Hz or 56Hz~64Hz

Output Frequency Range (Battery Mode): 50Hz±0.1Hz or 60Hz±0.1Hz

Output Surge Ratio: 3:1

Output Harmonic Distortion: ≤3% THD (linear load), ≤5% THD (non-linear load)

Conversion Time AC to DC: 0ms

Conversion Time Inverter to Bypass: 0ms

Waveform (Battery Mode): Pure sine wave

Mains Mode Efficiency: 93%

Battery Mode Efficiency: 91%

Standard Battery Model: 12V /7AH(B)

Standard Battery Quantity: 16 (specific 20)

Standard Battery Maximum Charging Current: Preset 1.0A±10%, Maximum 2.0A±10%

Standard Battery Charging Voltage: 218.4VDC±1%/273VDC±1%

Long-Run Battery Model: Depends on the applicant

Long-Run Battery Quantity: 16-20 (adjustable)

Long-Run Battery Maximum Charging Current: 1A/2A/4A/6A (adjustable, 6A only applicable for 16 batteries)

Long-Run Battery Charging Voltage: 273VDC±1% (based on 20 batteries)

LCD or LED Display: Load size, battery capacity, mains mode, battery mode, bypass mode, fault indication;

Note: Domestic standard with LED display, international with LCD display

Battery Mode Alarm: Beeps once every 4 seconds

Low Battery Alarm: Beeps once every 1 second

Overload Alarm: Beeps once every 1 second

Fault Alarm: Continuous beeping

Standard Unit Dimensions, Depth x Width x Height (mm): 442×190×688

Standard Unit Net Weight (kg): 66 (specific 75)