Conveyor belt cleaning equipment cleaning box

MH-1400 Conveyor Belt Cleaning Equipment Cleaning Box Meihuan

The cleaning box is an integrated cleaning system that combines multiple functions such as belt wetting, multi-stage cleaning, belt drying, and material recovery, making the return belt drier and cleaner. As a secondary cleaning system installed on the return belt of a belt conveyor, the cleaning system can wash the return belt, solving environmental pollution issues caused by residual material spillage in the conveyor's return section and preventing belt misalignment caused by residual material adhering to idlers.

Using a belt box system to remove return belt material has been proven to be one of the effective belt cleaning methods. It is recommended to use the belt cleaning box system in conjunction with belt cleaners to achieve optimal cleaning results.

The cleaning box system includes: · Spray system · Drainage system · Cleaner group · Inspection door · Fixed pressure roller group · Control system · Drying system. The belt cleaning box system offers customization services. The design of the belt cleaning box requires comprehensive consideration of factors such as: · On-site application conditions (e.g., belt speed, conveyed material, belt width, and belt type) · Desired level of cleanliness · On-site water supply, water quality, and air supply conditions · Sewage discharge. Advantages of the cleaning box system: · The spray system softens the material, making return belt material easier to remove · Prevents material buildup at the junction of the cleaner blade and the return belt · Reduces friction between the blade and the belt through water lubrication, lowers humidity, and extends the lifespan of both the blade and the belt · Well-sealed inspection doors facilitate easy inspection and maintenance · The belt is dried before leaving the cleaning box system, keeping it clean · The drainage port design of the cleaning box system allows for easy discharge of sewage.

Function:

Removes adhered material from the working surface of the return belt.

Features:

Multi-stage cleaners for thorough cleaning; all cleaners can be replaced as a whole, reducing later maintenance; high-pressure washing cleans the belt surface; alloy cleaners with high wear resistance; elastic constant pressure device compensates for wear; only requires drilling for drainage, no ground support needed, low foundation load, and low cost.

[Working Principle]

When the belt conveyor starts working, the cleaning device interlinks with the conveyor signal and immediately begins operation. The return belt passing over the cleaning machine is slowly pressed down by the automatic engagement-disengagement device, ensuring full contact between the belt's working surface and the water distribution softening roller and the cleaning system's scraper. Then, the solenoid valve opens, and purified water is evenly sprayed onto the belt surface through nozzles, washing and softening adhered material on the belt's working surface. Subsequently, the cleaning system's scraper gradually removes the material, achieving a clean belt surface. The cleared sludge and excess water are temporarily collected in the collection box below the equipment and then discharged at a fixed point by the spiral drainage system.

When the belt conveyor stops, the cleaning system ends its operation, and the automatic engagement-disengagement device disengages, returning the belt to its initial state.

Performance Features;

1. Compact structure, lightweight, easy operation, and effective results.

2. Good on-site adaptability.

3. Dual alloy scrapers for cleaning, suitable for various working conditions.

4. Automatic operation.

5. Excellent belt cleaning effect.

6. Does not damage the belt.

Shandong Meihuan