LS3050 Compressed Air Oil Content Analyzer

Applications of Compressed Air Oil Content Analyzer

Used for oil content analysis in compressed gases across industries such as aerospace, medical, special equipment, air separation plants, universities, etc. Different industries have varying quality requirements for compressed gases, and oil content is one of the factors affecting compressed gas quality. It can also be applied to measure oil content in surface water, groundwater, industrial wastewater, as well as monitoring oil in flue gas from the catering industry and oil content in solids. This instrument is a professional device for measuring oil content in water, gas, and solids.

Basic Principle

When monochromatic light passes through the measured solution, its energy is absorbed. The intensity of light absorption is proportional to the concentration of the substance being measured, in accordance with Lambert-Beer's Law: A=log(1/T)=log(I0/I)=a×b×c.

Compliance Standards:

Complies with National Standard: GB/T13277.2-2015 Compressed Air Part 2 Method B2

Complies with National Standard: HJ 1077-2019 "Stationary Source Emission—Determination of Oil Fume and Oil Mist—Infrared Spectrophotometry"

Complies with National Standard: HJ1051-2019 "Soil—Determination of Petroleum—Infrared Spectrophotometry"

Complies with National Standard: "GB18483-2001 Emission Standard for Oil Fume from Catering Industry"

Complies with National Standard: "GB3838-2002 Environmental Quality Standards for Surface Water"

Instrument Functions

1. Measurement Target: Oil content in gaseous substances

2. Functions such as report printing, spectrum display, storage, and printing

3. Built-in microcontroller chip, intelligent fault self-diagnosis, unaffected by room temperature changes, continuous automatic analysis and measurement, automatic temperature compensation.

4. Analysis system compatible with Windows 7 and Windows 10.

5. Direct reading function for non-dispersive measurement results.

6. Intelligent data analysis for purity testing

7. Compatible with various environmental reagents

8. Features calibration coefficient function for measurement instruments, supports standard curve calibration, single-point calibration, and coefficient calibration.

Technical Specifications

Intelligent fault self-diagnosis, automatic peak tracking and correction

Uses pulsed light source for information reception and output

Instrument scanning range: 3400 cm⁻¹ to 2400 cm⁻¹ (2930 cm⁻¹, 2960 cm⁻¹, 3030 cm⁻¹)

Absorbance range: 0.00000 to 2.00000 AU

Measurement range: 0 to 9000.00 mg/m³

Minimum detectable concentration: 0.001 mg/m³

Resolution: 0.001 mg/m³

Maximum measurement concentration: 100

Wavenumber accuracy and repeatability: ±1 cm⁻¹

Linear correlation coefficient R > 0.9999, methyl resolution > 2%

Automatic blank zero adjustment

Sample analysis time: Full spectrum scan: 30 seconds

Fixed-point multiple scans: 2 seconds; Non-dispersive infrared method: 2 seconds

Operating temperature: 2°C to 40°C, relative humidity: 10% to 90%