YAYE High-Temperature Resistant HEPA Filter

The 260-degree high-temperature high-efficiency air filter is primarily used to filter particles such as tar, soot, and dust generated in pharmaceutical high-temperature sterilization tunnels or high-temperature drying ovens. It mainly consists of an outer frame, filter paper, protective mesh, and sealing strips.

260-Degree High-Temperature Resistant High-Efficiency Filter Applicable Locations:
1. High-cleanliness environments such as aerospace, electronics, semiconductors, wafers, biopharmaceuticals, hospitals, and food processing.
2. Terminal ends of air conditioning and ventilation systems (final filtration and hot air high-temperature ovens or baking equipment).
3. Clean working environments with high-temperature requirements at the terminal end, such as hospital operating rooms, biopharmaceutical facilities, laboratories, circuit boards, microelectronics, optics, LED optoelectronics, and QS food processing or purification equipment.

260-Degree High-Temperature Resistant High-Efficiency Filter Materials and Technical Specifications:

Filtration Grade: H13-H14 (EN779);

Filtration Efficiency: H13: 99.99%@0.3μm, H14: 99.995%@0.3μm;

Outer Frame: Aluminum alloy, stainless steel, galvanized sheet metal;
Filter Media: Special organic synthetic fiber, glass fiber;
Protective Mesh: Aluminum mesh or stainless steel wire mesh;
Final Resistance: (Recommended) 250Pa - (Maximum) 300Pa
Maximum Airflow: 125% of rated airflow
Temperature Resistance: ≤300℃
Humidity: 80%

Optional aluminum profile thickness: 120~220mm

Precautions for Using the 260-Degree High-Temperature Resistant High-Efficiency Filter:

1. Filtration Efficiency of High-Temperature High-Efficiency Filters
Due to the physical characteristics of the adhesives used (poor fluidity), such as red high-temperature silicone resistant to 260°C and black high-temperature inorganic adhesive resistant to 350-400°C, the actual filtration efficiency of a 250°C H13 high-temperature high-efficiency filter ranges between H12 and H13, while that of a 350-400°C H13 high-temperature high-efficiency filter ranges between H11 and H12.

2. Precautions Before Using High-Temperature High-Efficiency Filters
Since the silicone and inorganic adhesives used in high-temperature high-efficiency filters cure from the surface inward, the thicker the adhesive layer, the more difficult it is to cure. Under normal conditions, the curing time for the adhesive is 3-7 days. If a high-temperature high-efficiency filter that has not fully cured is directly installed in high-temperature equipment for normal use, it may lead to issues such as cracking, expansion, or detachment of the high-temperature adhesive from the outer frame.