FSW8 Spectrum and Signal Analyzer

Rohde & Schwarz FSW8 Spectrum and Signal Analyzer

Product Features

Phase noise as low as -137 dBc/Hz @ 1 GHz, 10 kHz offset

WCDMA adjacent channel power ratio test with -88 dB dynamic range (with noise cancellation enabled)

Up to 2 GHz analysis bandwidth

Total measurement uncertainty as low as 0.4 dB within 8 GHz range

[Brief Introduction]

Main Features

* Frequency range covers from 2 Hz to 8/13.6/26.5/43.5/50/67/85 GHz (expandable to 110 GHz with external harmonic mixer)

* Phase noise as low as -137 dBc/Hz @ 1 GHz, 10 kHz offset

* WCDMA adjacent channel power ratio test with -88 dB dynamic range (with noise cancellation enabled)

* Up to 2 GHz analysis bandwidth

* Total measurement uncertainty as low as 0.4 dB within 8 GHz range

* High-resolution 12.1-inch touchscreen for easy operation [Detailed Description]

R&S FSW8 Spectrum and Signal Analyzer, 2 Hz to 8 GHz

The new high-performance R&S FSW signal and spectrum analyzer meets customers' high-performance requirements, offering low phase noise, wide analysis bandwidth, and intuitive operation, making testing fast and simple.

Main Features

* Frequency range covers from 2 Hz to 8/13.6/26.5/43.5/50/67/85 GHz (expandable to 110 GHz with external harmonic mixer)

* Phase noise as low as -137 dBc/Hz @ 1 GHz, 10 kHz offset

* WCDMA adjacent channel power ratio test with -88 dB dynamic range (with noise cancellation enabled)

* Up to 2 GHz analysis bandwidth

* Total measurement uncertainty as low as 0.4 dB within 8 GHz range

* High-resolution 12.1-inch touchscreen for easy operation

* Supports multitasking parallel measurement and display

R&S FSW Spectrum and Signal Analyzer, 2 Hz to 8 GHz

R&S FSW Spectrum and Signal Analyzer, 2 Hz to 13.6 GHz

R&S FSW Spectrum and Signal Analyzer, 2 Hz to 26.5 GHz

R&S FSW Spectrum and Signal Analyzer, 2 Hz to 43.5 GHz

R&S FSW Spectrum and Signal Analyzer, 2 Hz to 50 GHz

R&S FSW Spectrum and Signal Analyzer, 2 Hz to 67 GHz

Features

RF performance meets demanding requirements

* Unparalleled phase noise – ideal for oscillator testing in radar and communication applications

Developers of oscillators, frequency synthesizers, and transmitter systems will benefit from the outstanding phase noise measurement dynamic range performance of the R&S FSW. At a 10 kHz offset from the carrier center frequency, the R&S FSW achieves phase noise of -137 dBc (1 Hz) at 1 GHz center frequency and -128 dBc (1 Hz) at 10 GHz center frequency. At a 100 kHz offset, the phase noise is -110 dBc (1 Hz) and -90 dBc (1 Hz) at the same center frequencies, respectively. The R&S FSW surpasses previous-generation analyzers by up to 10 dB in phase noise performance.

Phase noise at 1 GHz center frequency, 10 kHz offset: -137 dBc (1 Hz)

* Low displayed average noise level for excellent spurious test dynamic range

The displayed average noise level (DANL) is as low as -159 dBm (1 Hz) at 2 GHz and -150 dBm (1 Hz) at 25 GHz without using a preamplifier. The R&S FSW provides fast and reliable spurious testing over a wide frequency range. The DANL can be further improved by 13 dB with the noise cancellation function enabled. Users can detect extremely small spurious signals previously hidden below the noise floor, effectively optimizing transmitter systems.

* Built-in high-pass filter simplifies harmonic testing

The R&S FSW can be optionally equipped with a switchable high-pass filter (R&S FSW-B13) for harmonic testing of transmitter systems up to 1.5 GHz. Compared to traditional spectrum analyzers, significant dynamic range improvement is achieved. No external filter is needed, making it convenient to set up test systems for GSM, CDMA, WCDMA, LTE, and TETRA systems.

* High selectivity in the low-frequency band

* High accuracy

* Separate receiver path provides unparalleled dynamic range up to 1 GHz

Future-Proof

* Up to 500 MHz demodulation bandwidth

The increasing demand for analysis bandwidth due to linearization of power amplifiers for multi-carrier or broadband applications to improve efficiency, or the growing bandwidth occupied by communication systems themselves, is met by the R&S FSW, which offers up to 500 MHz analysis bandwidth to address these challenges.