CALYS 1500 Dual Input Temperature Calibrator

The CALYS 1500 Dual Input Temperature Calibrator

The CALYS 1500 is the most advanced and accurate laboratory electrical calibrator in its series. It can function not only as a simulator (IN/OUT) but also as a dual-channel thermometer (IN/IN) for performing comparative calibrations. It calibrates HART transmitters (HART communicator) and thermistors. It is the perfect tool for advanced process maintenance and test bench applications across all industries. Suitable for all field and laboratory measurements, it can simultaneously measure and generate various signals for temperature, resistance, process, pressure, and frequency through two isolated channels in a single instrument. The CALYS 1500 offers extended features (temperature simulation, scaling, step, synthesizer, statistical functions, etc.) and audit trails compliant with 21 CFR Part 11 and NADCAP heat treatment standards, making advanced development and traceability easier. Users or user groups can save and recall up to 10 complete configurations, making the CALYS 1500 an ideal tool for routine and repetitive tasks. High-performance measurement and simulation with the CALYS 1500 Dual Input Temperature Calibrator:

Temperature: up to 0.005% of reading

Resistance: up to 0.006% RDG, range up to 50 kΩ

Current: up to 0.007% RDG and 100 mA range + 24 V loop power supply

Voltage: up to 0.005% RDG and 50 V range

Frequency: up to 0.01% RDG and 100 kHz range

Pressure: with external pressure modules (for comparative calibration with pressure pumps)

Calibration Procedures and DATACAL Software
With this user-friendly instrument, calibration tasks can be quickly performed across the entire process chain. Over a full week, take the process calibrator into the field with 10 calibration procedures stored in the device. Connect the probe to the instrument, run the procedure, and save the results for easy and fast on-site calibration. Back in the office, you can upload the data to a computer to issue customized calibration certificates using the dedicated DATACAL calibration software.

Innovative and Ergonomic Design:
Metal housing for enhanced durability
Capacitive touchscreen
USB communication
Carrying handle
Battery and mains power supply

Graphical Screen and Display Resolution
The CALYS 1500 allows selection of digits after the decimal point: this feature is useful when users wish to display the best resolution of calibration or, conversely, limit it for simple verification. The CALYS 1500’s dual display permanently shows measured values, output values, meter functions, and active features. At the top, the date, time, and external temperature are also indicated. During measurement, the average, maximum, minimum, and number of measurements are displayed on the left. For output, this section of the screen shows all details of ramp, step, and constant value output functions. Drop-down menus, used with the navigator, provide online help to simplify probe and wire connections.

General Specifications
Dimensions (L x W x H): 340 x 320 x 160 mm
Weight: 4.6 kg
Display: 240 x 320 pixel LCD graphic display with backlight and contrast control; results displayed as value tables or trend curves
Power Supply: 230 V ±10%, 50/60 Hz
Battery: Type: Lithium-ion; Charging time: 3 hours; Life: 8 hours
Communication Port: USB interface

Environmental Specifications
Reference Range: 23°C ±5°C (RH: 45 to 75%, non-condensing)
Operating Reference Range: -10 to 50°C (RH: 20 to 80%, non-condensing)
Extended Operating Range: -15 to 55°C (RH: 10 to 80%, non-condensing; 70% at 55°C)
Storage Temperature Limits: -30°C to +60°C
Maximum Altitude: 0 to 2000 m
IP Protection: IP54, compliant with EN 60529