Handheld Process Signal Calibrator CP 6632

Handheld Process Signal Calibrator CP 6632

The Handheld Process Signal Calibrator CP 6632 is used for measuring or generating process signals such as process current and voltage (with a reading accuracy of 150 ppm). This instrument is rugged and easy to use, designed to simplify the maintenance of sensors and transmitters that utilize process signals like 4-20 mA or 0-10 V.

Thanks to its scaling function and specific ranges, the instrument is suitable for a variety of process installations. It can simulate ramps, steps, and fixed values to control process transmitters, panel meters, and recorders.

Low temperature coefficient: 15 ppm/°C for voltage and 20 ppm/°C for current. With its high accuracy of 150 ppm, the CP 6632 is an ideal standard for field use, even under demanding environmental conditions.

The CP 6632 comes standard with 4 alkaline AA batteries. An optional battery charger is available for use with rechargeable batteries.

Key Features:
- High accuracy: 0.015% reading, with resolution of 1 mV and 1 μA

- Values displayed in A, mV, and %

- Low temperature coefficient: 15 ppm/°C for voltage, 20 ppm/°C for current

- Active or passive loop power supply

- Measurement with HOLD function

- Simulation of ramps, pre-programmed steps, and frequency synthesizer values

- Display of minimum, maximum, and average values

- Backlight


General Specifications

Size: 157 x 85 x 45 mm

Weight: 306 g

Display: 160 x 160 pixel LCD graphic display with backlight
Results displayed in value table or trend curve form

Power Supply:
4 AA batteries 1.5 V or rechargeable NiMH batteries, optional with built-in charger
Autonomy:
> 53 hours in measuring voltage and current and simulating voltage
> 12 hours in simulating current

Communication Port: USB interface


Environmental Specifications
Reference range: 23°C ± 5°C (relative humidity: 45 to 75%, no condensation)
Operating reference range: -10 to 50°C (relative humidity: 20 to 80%, no condensation)
Extreme operating range: -15°C to +55°C (relative humidity: 10 to 80%, no condensation) (70% at 55°C)
Storage temperature limits: -30°C to +60°C
Maximum altitude: 0 to 2,200 m
IP protection: IP54 compliant with EN60529

Safety Specifications

Protection:
Electronic protection up to 250 V for "voltage" wires
Fuse protection for "current" wires
Protection against "current" break during inductive resistance measurement

Class:
Compliant with EN 61010-1
Class II, Pollution Degree 2

Rated voltage: 60 V

Shock and Vibration: EN 61010-1 standard

EMC Compliance
Immunity:
EN 61000-4-2
EN 61000-4-3 standard
EN 61000-4-5 standard
EN 61000-4-6 standard
EN 61000-4-11 standard
EN 61000-4-4
Conducted and Radiated Emissions:
EN 55022, Class B
EN 61000-3-2 standard
EN 61000-3-3 standard


Instrument:
CP 6632 Handheld Voltage and Current Process Calibrator
Standard Delivery:
- User manual
- 4 AA batteries
- 2 cables with alligator clips
- Protective case
- Carrying strap
- Factory test report

Accessories:
AC6908 Soft carrying case for handheld instruments
AN6011 Charger + batteries for handheld instruments

Certification:
QMA11EN COFRAC calibration certificate
Includes all relevant points tested on the device

Packaging Information:
Dimensions 157 x 85 x 45 mm
Weight (without packaging) 306 g