Thermocouple measurement and simulation module TIO0110

Thermocouple Measurement and Simulation Module TIO0110

The TIO0110 is a thermocouple (T/C) measurement and simulation module designed to work in conjunction with the Meriam MFT 4000 Series Multi-Function Tester. The module accurately measures or sources ±110 millivolts (mV) for any of 12 different T/C types according to NIST 175, ITS-90 (default), or ITS-68 standards. In this measurement mode, the TIO0110 module converts millivolts DC into temperature values in the user-selected temperature units (Fahrenheit, Celsius, Rankine, or Kelvin) under each selected standard. For direct reading or troubleshooting, millivolts are also displayed.

In this simulation mode, the TIO0110 module simulates an accurate current signal to the receiving device. The user can input precise simulated temperature values

and change this temperature value with the MFT ramp control, setting and selecting three automatic step test procedures for each T/C type. Test points are determined by the user and can be tracked automatically or manually step by step.

T/C calibration coefficients are factory-loaded into the module memory, allowing instant access by the base MFT. Field recalibration of the module is provided by the MFT's "RCAL" function.

Specifications

Input Impedance: > 10 MΩ
Warm-up Time: ≤ 1 minute at full rated accuracy
Millivolt Accuracy: ± 0.025%R + 0.005%FS
Temperature Effect: ≤ 2 µV/°C
T/C Measurement Accuracy: ±0.3°C for types E, J, K, N & T
T/C Measurement Accuracy: ±1.0°C for types B, R & S
T/C Measurement Accuracy: ±0.5°C for types C, D, M & P
Connectors:
- Measurement: Standard miniature thermocouple connector
- Transmission: Standard miniature thermocouple connector
Storage Temperature: -40°F to 140°F (-40°C to 60°C)
Operating Temperature: 23°F to 122°F (-5°C to 50°C)
Cold Junction Effect: ± 0.5°C (maximum)
Resolution: ±0.1° for T/Cs, ±0.001 for mV
Voltage Range: ± 110.000 mV DC
Units: °F, °C, °R, °K, mV
Weight: 3 oz
Power Supply: Provided by MFT (simulation mode only)
Available Certifications:
NIST Traceable Millivolt Function Standard
CE Mark
Intrinsically Safe – MET Laboratories per CSA C22.2 & UL 913 Class I Division I, Groups A, B, C & D