DICKSON Wireless Temperature Logger WT320

DICKSON Wireless Temperature Logger WT320

Place these internal loggers throughout the facility and automatically receive all data on your PC. No need to retrieve from loggers or hardwire them back to your PC. This is the simplest and most cost-effective way to create a scalable monitoring network.


Features:

Email and text alerts

No need to change charts and pens

Wireless automatic download to your computer

Loggers continue recording during power outages

New replaceable sensors


Product Specifications:

Alarm Types: High/Low, Low Battery, Calibration Due, Loss of Communication

Operating Environment Relative Humidity: 0-95% RH non-condensing

Operating Environment Temperature: -22.0 to 160.0°F (-30.0 to 71.0°C)

Antenna Type: Internal

Certifications: RoHS, FCC Part 15 Compliance, CE

Battery Life (Average): 6 months (2-minute sampling rate under moderate conditions)

Cable: USB cable

Cable Length: 6.0 feet

Calibration Options: N100, N300, N400, and N520

Channels: CH1: Temperature

Capacity: 32,000

Digital Display: Yes

Dimensions: 1.7 x 4.25 x 4.25 inches

Download Type: Wireless

Enclosure: Black; ABS plastic clamshell

IP Rating: 21

Included Accessories: USB cable, 4 AA batteries, Quick Start Guide

Installation Options: Freestanding or wall-mounted (with keyhole)

Note on Alarm Types: All alarm conditions will generate pop-up notifications in Dickson WiZARD software. Text/email notifications are available with WiZARD SECURE software.

Note: The WT320 logger reads temperature and periodically transmits data back.

Output Signal: 4800 baud serial

PC Requirements: Minimum 2 GB RAM; Windows XP (with Service Pack 3) and Windows 7; 2 available USB ports

Power Supply: 4 AA batteries (user-replaceable)

Power Status Indicator: Red/Green/Blue (RGB) LED

Radio Frequency: 900 MHz (902 to 928 MHz)

Remote Probe Dimensions: Thermistor sensor mounted in polycarbonate plastic; 1.5" x 0.5" (1.25 cm x 4.5 cm)

Remote Sensor Length: 10 feet (optional)

Remote Sensor Type: 1 field-replaceable digital temperature sensor

Response Time: 30 seconds to 63% of full scale

Sampling Interval: User-selectable (10 seconds to 1 hour, in 10-second intervals)

Signal Strength: Less than 100 mW

Storage Conditions: -22.0 to 158.0°F (-30.0 to 70.0°C)

Storage Conditions RH: 0-95% RH non-condensing

Temperature Accuracy: +/- 1.2°F from 20.0 to 122.0°F, 1.8°F from -30.0 to 50.0°C (+/- 1.0°C)

Temperature Range: -22.0 to 122.0°F (-30.0 to 50.0°C)

Temperature Sensor Type: Field-replaceable

Unit Weight: 3 pounds

Units per Package: 1

Wireless Range: 300 feet