Oscilloscope Card PCIe8912M/14M/16M Synchronous Analog Acquisition Card

250 MS/s 12/14/16-bit 2-channel synchronous sampling digitizer, specifically designed for high-frequency and high dynamic range signals with input signals up to 100 MHz. Seamlessly integrates with LabVIEW and provides graphical API functions. The analog input range can be software-programmed to ±1V or ±5V. Equipped with up to 2GB of onboard memory. Ideal for high dynamic range applications such as wireless communications, radar/sonar, ultrasound, and imaging.

Features:

1. Supports ×8 Gen2 interface protocol.

2. High-speed, stable, and reliable sampling rate of 250 MS/s.

3. Analog bandwidth up to 100 MHz.

4. Each input channel of the digitizer has an independent A/D converter and an independent programmable amplifier, enabling synchronous signal recording without phase delay.

5. Each channel can be independently programmed with an input impedance of 1MΩ or 50Ω, making it flexible for both high and low impedance applications.

6. Onboard 2GB memory ensures long-duration recording even at high sampling rates.

7. Supports continuous acquisition and finite-point acquisition. Achieves extremely high-speed data streaming via DMA, with continuous transfer speeds up to 1 GB/s, enabling storage or analysis while preserving complete information. Combined with Altai Technologies' measurement and control software and the PCIe-SSDM2X storage module, it enables high-speed data streaming and playback, compatible with mainstream disk arrays on the market.

8. When multiple PCIe8912/8914/8916 boards are running in the same system, they can be interconnected via a synchronization bus, allowing the master board's clock and trigger signals to be distributed to slave boards, providing a system with 2 or more fully synchronized channels.

Product Specifications: