Reverse Osmosis Membrane Flocculant EX-401

1, Property and Uses
▲ Mainly used in reverse osmosis pretreatment systems;
▲ Can partially or completely replace currently used aluminum and iron salt inorganic coagulants, and can be used alone or mixed with aluminum and iron salts;
▲ Wide pH range for water bodies, fast agglomeration rate, high density and solidity, good settling;
▲ Also effective in removing turbidity and sterilizing algae, unaffected by chlorine treatment, and does not increase soluble metals (aluminum, iron) in treated water;
▲ Increases solid-liquid separation speed, extending the filter's operating cycle during direct filtration;
▲ Can be miscible with water in any proportion.
2, Technical index

3. How to use
▲ EX-401 is a polymer flocculant made by precisely processing inorganic salts and polymers. In addition to having strong inorganic polymer flocking properties
In addition to its electrical neutralization and adsorption flocculation effects, it also has strong adsorption and bridging effects from organic polymer flocculants, making the product widely used in multi-media filtration
and in the process of flocculation and settling;
▲ The product performs better in high pH water bodies; The product has no special requirements for dosing systems or materials.
4 . Add-on Instructions
☆ Usually, the dilution ratio is less than 10 times, or dosing with the original solution depends on the dosing system configuration;
☆ Technicians recommend appropriate dosage based on water quality and process characteristics, and achieve excellent results through on-site adjustment. Typical dosage is 4-10ppm;
☆ The agent dosing point should be chosen as far from the filter inlet (5.0~7.0 meters), and the spray point should ideally be at the center of the water flow pipeline
Ensure uniform mixing of the chemical solution during turbulent water flow.
5. Packaging and storage
※ Packaged in plastic drums, 25 kg or 20 kg per drum;
※ Stable physical and chemical properties, stored in a cool place, shelf life is 1 year.
. Safety and protection
Pay attention to labor protection during operation, avoid contact with skin and eyes, and rinse thoroughly with plenty of water after contact.