WT-302 Anionic Polyacrylamide PAM

1, Property and Uses
This product is a water-soluble polymer. When used in combination with coagulants and flocculants, it mainly acts on suspended solids through sweeping and bridging, significantly improving coagulation and flocculation effectiveness. Mainly used for sludge dewatering, solid-liquid separation, and recovery of coal washing, mineral processing, and paper manufacturing wastewater. Can be used for industrial wastewater and urban domestic sewage treatment. It can be used as an additive in mud materials for drilling in oilfields and geological exploration.

2, Technical index

3. Usage Method and Dosage
When using, prepare this product as a 0.1% concentration aqueous solution, preferably using neutral, salt-free water. When dissolving, evenly sprinkle this product into the stirred water and heat appropriately (<60°C) to accelerate dissolution. This product is added after the flocculant, and through a small test, the optimal dosage is determined and the optimal pH of the water to be treated is adjusted. The typical dosage is 0.5~2g per ton of water

4. Packaging and storage
Packaged in polypropylene woven bags lined with plastic bags, each bag weighs 25kg; This product is hygroscopic. Store sealed in a cool, dry place at temperatures below 35°C. Avoid spilling solid products on the ground to prevent moisture absorption and making the ground slippery.

5. Safety protection
Operators should wear protective equipment and rinse with clean water after skin contact.