(Specially Prepared) Acidic Reverse Osmosis Membrane Scale Inhibitor (Special for High Sulfate Water) ENK-101

1, Property and Uses
▲ Mainly targets water with high sulfate content, controlling sulfate content to 10,000ppm without scaling;
▲ Effectively controls inorganic scaling over a wide concentration range. Without adding acid, the maximum allowable LSI value is 3.0
▲ Does not aggregate with iron-aluminum oxides or silicon compounds to form insoluble substances;
▲ Can be used for reverse osmosis CA and TFC membranes, nanofiltration membranes, and ultrafiltration membranes;
▲ Excellent solubility and stability;
▲ Effective for water supply pH values ranging from 5 to 10.
2, Technical index

3. Add-on Instructions
The required dosage should be calculated based on the water quality analysis report and system conditions, with a typical dosing concentration of 2–6 ppm, diluted 10 times with demineralized water.
4. Usage Instructions
▲ Chemicals are added before the security filter;
▲ Calibrate the actual output of the metering pump;
▲ When preparing the solution, stir thoroughly for 15–20 minutes;
▲ Regularly clean the dosing tank to prevent bacterial growth.
5. Packaging and storage
※ Packaged in plastic barrels, 25kg or 20kg;
※ Stable physical and chemical properties, store in a cool place with a shelf life of 2 years.
6. Safety protection
Pay attention to labor protection during operation, avoid contact with skin and eyes, and rinse thoroughly with plenty of clean water after contact.