Water Treatment Scale Inhibitor (Broad Spectrum) Acidic Reverse Osmosis Membrane Scale Inhibitor

(Broad Spectrum) Acidic Reverse Osmosis Membrane Scale Inhibitor   EN-170

I. Performance and Applications

▲ Broad-spectrum reverse osmosis scale inhibitor with excellent scale inhibition performance and wide applicability, effective for conventional water quality in scale inhibition and dispersion;

▲ Effectively controls inorganic scaling over a wide concentration range; maximum allowable LSI value is 3.0 without acid addition;

▲  Does not form insoluble precipitates with iron/aluminum oxides or silicon compounds; suitable for reverse osmosis CA and TFC membranes, nanofiltration membranes, and ultrafiltration membranes;

▲  Excellent solubility and stability;

▲  Effective within feedwater pH range of 5-10.

II. Technical Specifications

III. Dosage Instructions

Calculate the appropriate dosage concentration based on water quality analysis and system conditions. Typical dosage concentration is 2-6 ppm, diluted 10 times with desalinated water.

IV. Usage Method

▲  Add the chemical before the security filter;
▲  Calibrate the actual output of the dosing pump;
▲  Stir the prepared solution thoroughly for 15-20 minutes;
▲  Regularly clean the dosing tank to prevent bacterial growth.

V. Packaging and Storage

※  Packaged in plastic drums of 25 kg or 20 kg each;

※  The acidic reverse osmosis membrane scale inhibitor has stable physicochemical properties. Store in a cool place with a shelf life of 2 years.

VI. Safety Precautions

Observe labor protection practices during operation. Avoid contact with skin and eyes. In case of contact, rinse thoroughly with plenty of water.