Anionic Polyacrylamide PAM

WT-302   Anionic Polyacrylamide PAM

I. Properties and Uses
This product is a water-soluble high molecular polymer. Used in conjunction with coagulants and flocculants, it primarily acts on the surface of suspended solids through mechanisms such as sweeping and bridging, significantly enhancing coagulation and flocculation effects. It is mainly used for sludge dewatering, solid-liquid separation, coal washing, mineral processing, and the recovery of papermaking wastewater. It can be applied in industrial wastewater and urban domestic sewage treatment. It can also serve as an additive for drilling mud materials in oil fields and geological exploration.

II. Technical Indicators

III. Usage Method and Dosage
When using, prepare this product into a 0.1% concentration aqueous solution, preferably using neutral, salt-free water. During dissolution, evenly sprinkle the product into stirred water. Appropriate heating (<60℃) can accelerate dissolution. This product should be added after the flocculant. Determine the dosage of this product through small-scale tests and adjust the pH value of the water to be treated. The general dosage is 0.5～2g per ton of water.

IV. Packaging and Storage

Packaged in polypropylene woven bags with inner plastic liners, each bag weighing 25kg; This product is hygroscopic and should be sealed and stored in a cool, dry place with a temperature below 35℃. Avoid spilling solid product on the ground to prevent slipping due to moisture absorption.

V. Safety Precautions

Operators should wear protective equipment. In case of skin contact, rinse with clean water.