Acidic Reverse Osmosis Membrane Scale Inhibitor EN-170

Acidic Reverse Osmosis Membrane Scale InhibitorEN-170

I. Performance and Applications

▲ Broad-spectrum reverse osmosis scale inhibitor with excellent scale inhibition effect and wide application range, providing good scale inhibition and dispersion for conventional water quality;

▲ Effectively controls inorganic scaling over a wide concentration range, with a maximum allowable LSI value of 3.0 without acid addition;

▲ Does not form insoluble substances by coagulating with iron/aluminum oxides and silicon compounds, suitable for reverse osmosis CA and TFC membranes, nanofiltration membranes, and ultrafiltration membranes;

▲ Excellent solubility and stability;

▲ Effective within feedwater pH range of 5-10.

II. Technical Specifications

III. Dosage Instructions

Calculate an appropriate dosage concentration based on water quality analysis report and system conditions. Typical dosage concentration is 2-6 ppm, diluted 10 times with desalinated water.

IV. Usage Method

▲ Add the chemical before the security filter;
▲ Calibrate the actual output of the metering pump;
▲ Stir the prepared chemical solution thoroughly for 15-20 minutes;
▲ Regularly clean the dosing tank to prevent bacterial growth.

V.Packaging and Storage

※ Packaged in plastic drums of 25 kg or 20 kg per drum;

※ Acidic reverse osmosis membrane scale inhibitor has stable physical and chemical properties. Store in a cool place with a shelf life of 2 years.

VI.Safety Protection

Pay attention to labor protection during operation. Avoid contact with skin and eyes. Rinse thoroughly with plenty of water if contact occurs.