High Sulfate Water Special Membrane Scale Inhibitor

(Special Formula) Acidic Reverse Osmosis Membrane Scale Inhibitor (For High Sulfate Water Quality)   ENK-101

I. Performance and Uses

▲ Specifically designed for water with high sulfate content, prevents scaling at sulfate levels up to 10,000 ppm;

▲ Effectively controls inorganic scaling over a wide concentration range, with a maximum allowable LSI of 3.0 without acid addition;

▲ Does not form insoluble precipitates with iron/aluminum oxides or silicon compounds;

▲ Suitable for reverse osmosis CA and TFC membranes, nanofiltration membranes, and ultrafiltration membranes;

▲ Excellent solubility and stability;

▲ Effective within a feedwater pH range of 5-10.

II. Technical Specifications

III. Dosage Instructions

The required dosage should be calculated based on water quality analysis and system conditions. The typical dosage concentration is 2–6 ppm, diluted 10 times with deionized water.

IV. Usage Method

▲ Add the chemical before the security filter;

▲ Calibrate the actual output of the dosing pump;

▲ Stir the prepared solution thoroughly for 15–20 minutes;

▲ Regularly clean the dosing tank to prevent bacterial growth.

V. Packaging and Storage

※  Packaged in plastic drums, 25 kg or 20 kg;

※  Stable physicochemical properties, store in a cool place, shelf life of 2 years.

VI. Safety Precautions

Observe labor protection practices during operation. Avoid contact with skin and eyes. In case of contact, rinse thoroughly with plenty of water.