High Hardness High Alkalinity Water Special Membrane Scale Inhibitor

(Special Formula) Acidic Reverse Osmosis Membrane Scale Inhibitor (For High Hardness and High Alkalinity Water Quality)   ENK-102

I. Performance and Uses

▲  Specifically designed for water with high hardness, high alkalinity, and high pH, effectively controlling calcium carbonate and calcium sulfate scaling in reverse osmosis systems;

▲Effectively controls inorganic scaling over a wide concentration range, with a maximum allowable LSI value of 3.0 without acid addition;

▲ Does not form insoluble precipitates with iron/aluminum oxides and silicon compounds;

▲Suitable for reverse osmosis CA and TFC membranes, nanofiltration membranes, and ultrafiltration membranes;

▲Excellent solubility and stability;

▲ Effective within a feedwater pH range of 5-10.

II. Technical Specifications

III. Dosage Instructions

Calculate an appropriate dosage concentration based on water quality analysis reports and system conditions. The typical dosage concentration is 3–8 ppm, diluted 10 times with desalinated water.

IV. Usage Method

▲ Add the chemical before the security filter;

▲Calibrate the actual output of the dosing pump;

▲ Stir the prepared chemical solution thoroughly for 15–20 minutes;

▲Regularly clean the dosing tank to prevent bacterial growth.

V. Packaging and Storage

※   Packaged in plastic drums, 25 kg or 20 kg per drum.

※   Stable physicochemical properties; store in a cool place with a shelf life of 2 years.

VI. Safety Precautions

Observe labor protection during operation. Avoid contact with skin and eyes. In case of contact, rinse thoroughly with plenty of water.