Acidic Reverse Osmosis Membrane Scale Inhibitor (Specialized for High Iron and High Aluminum Water Quality)

(Special Formula) Acidic Reverse Osmosis Membrane Scale Inhibitor (Specially for High Iron and High Aluminum Water Quality)

I. Performance and Applications

▲ Specifically designed for water with high iron and aluminum content, effectively controlling iron concentration on the concentrate side up to 4ppm;

▲ Effectively controls inorganic scaling within a wide concentration range, with a maximum allowable LSI value of 3.0 without acid addition;

▲ Does not form insoluble precipitates with iron/aluminum oxides and silicon compounds;

▲ Suitable for reverse osmosis CA & TFC membranes, nanofiltration membranes, and ultrafiltration membranes;

▲ Excellent solubility and stability;

▲ Effective within feedwater pH range of 5-10.

II. Technical Specifications

III. Dosage Instructions

Calculate the appropriate dosage concentration based on water quality analysis report and system conditions. Typical dosage concentration is 3-8ppm, diluted 10 times with desalinated water.

IV. Usage Method

▲ Add the chemical before the security filter;

▲ Calibrate the actual output of the metering pump;

▲ Stir the prepared solution thoroughly for 15-20 minutes;

▲ Regularly clean the dosing tank to prevent bacterial growth.

V. Packaging and Storage

※ Packed in plastic drums, 25kg or 20kg per drum.

※ Stable physicochemical properties, store in a cool place with a shelf life of 2 years.

VI. Safety Protection

Observe labor protection during operation. Avoid contact with skin and eyes. Rinse thoroughly with plenty of water if contact occurs.