Limestone Calcium Oxide Testing Instrument

Limestone Calcium Oxide Detection Instrument Limestone Calcium Oxide Detection Instrument

Enter the instrument's main menu and press "1" to select the "Content Measurement" function.

3. After entering the "Content Measurement" screen, press the "◄" key to select the working curve corresponding to the sample to be tested (the instrument has 1 to 9 working curves to choose from). Repeatedly press the "◄" key to observe the changes in the working curve displayed on the screen and select the desired working curve.

4. In the "Content Measurement" screen, press the " " key to select the measurement time for the sample to be tested. Repeatedly press the " " key to observe the changes in the measurement time displayed on the screen, and you can select the desired measurement time.

5. Use a rubber bulb to blow off any loose dust from the surface of the pressed sample, place it on the instrument's slide plate, push the slide plate into the instrument to the measurement position, and then press the instrument's "Start" or "1" key. The instrument will automatically begin measurement. Once the measurement is complete, the instrument will display the content measurement result and automatically store the result.

6. After measuring the sample, promptly pull the instrument's slide plate out to the "Reference Sample" position. The instrument automatically detects the position of the slide plate and displays detection information such as "Reference Sample" or "Sample to Be Tested" in the lower left corner of the screen. If the slide plate is in the wrong position, this area will display nothing, and if the position is not corrected in time, the instrument will emit a "beep, beep, beep..." warning sound, with the words "Attention!" displayed in the lower left corner of the screen. Once the slide plate position is corrected, the words "Reference Sample" or "Sample to Be Tested" will appear in the lower left corner of the screen.

7. If the instrument's slide plate accumulates dust, clean it with a brush or dry cloth. Do not use a rubber bulb to blow the dust, as this may blow dust into the interior of the instrument. Over time, this could cause the instrument to malfunction and become unusable.

8. Avoid scratching the instrument's operation keyboard with hard objects, and do not operate it with sharp fingernails.

9. If the instrument malfunctions, do not attempt to disassemble it yourself, as any resulting consequences will be your responsibility. Users should promptly contact Lanxiang Instrument Manufacturer and may handle the issue themselves under the guidance of the manufacturer's professionals. When handling it yourself, be sure to turn off the instrument's power before opening the outer cover. After handling, close the outer cover and tighten the fixing screws before turning the instrument's power back on.