Fully Automatic Fluorite Sulfur Content Analyzer

Fully Automatic Fluorite Sulfur Content Tester Fully Automatic Fluorite Sulfur Content Tester Hebia Biaochuang Instrument Manufacturing Co., Ltd. Fluorite Sulfur Content Testing Instrument Fluorite Total Sulfur Analysis Equipment

 Utilizes coulometric titration for measurement, with the testing time automatically determined based on different samples, offering faster performance than the Eschka gravimetric method and high-temperature combustion neutralization method;

 Employs a linear electrolyte molecular concentration acquisition circuit to effectively resolve over-electrolysis issues;

Program-controlled automatic heating, temperature control, sample feeding, sample retraction, and measurement, with results automatically saved and printed, significantly improving work efficiency;

 Uses PID (proportional, integral, derivative) temperature control algorithm for accurate temperature control and fast heating speed;

 Features contactless switches with hardware over-temperature protection, ensuring safe and reliable operation;

Fluorite Sulfur Content Tester
0.001-100% 0.005% (Working Principle
The test sample is burned under high-temperature conditions in a purified air stream, where all forms of sulfur in the sample are decomposed by combustion. The sulfur is carried by the air stream into the electrolytic cell, where it combines with water to form H₂SO₃. This disrupts the dynamic equilibrium of the original iodine-iodide pair in the electrolytic cell, prompting the instrument to immediately output current to electrolyze potassium iodide solution, generating iodine to restore the original dynamic equilibrium. The amount of current consumed to restore this equilibrium correlates with the sulfur decomposed from the test sample, which is measured and calculated by the microprocessor.
Main Technical Specifications
【1】Total sulfur measurement range: 0.001-100%
【2】Sample combustion analysis time: 3-5 minutes, with automatic determination of titration endpoint and return.
【3】Temperature control: 500-1300°C controllable ±1°C. Temperature measurement: accuracy class 0.1; heating element is NF high-grade silicon carbide tube, with high-temperature zone length ≥120 mm, temperature adjustable as needed.
【4】Heating rate: 40-55°C/min, reaching 1300°C in approximately 35 minutes.
【5】Electrolytic cell: platinum metal electrode.
【6】Instrument stability: stabilizes within 1 minute after startup.
【7】Rated power supply: 220V±20%, 50Hz.)