High-temperature resistant laser displacement sensor
Contact Info
- Add:, Zip:
- Contact: 王先生
- Tel:18910132037
- Email:1322188373@qq.com
Other Products
FTM - Water-cooled Laser Displacement Sensor
1. Product Introduction:
The water-cooled laser displacement sensor uses a water circulation system to create a suitable working environment for sensors in special environments (high temperature, low temperature). The working temperature range of the sensor is -50℃～+200℃. There are a water inlet and a water outlet on the sensor, and you only need to connect circulating water to the sensor during operation.
2. Application Scenarios
1. Measure the distance of various objects with a reflecting mirror;
2. The optical filter can measure high-temperature measured objects;
3. The explosion-proof box can be used in explosion-proof environments;
4. The swing motor can be used for 2D contour measurement.
3. Performance Indicators
1. Optical parameters
Laser characteristics: Red laser diode.
Wavelength: 620nm～650nm.
Laser class: Class 2.
Spot type: Point or line.
Output power: Less than 1 milliwatt.
2. Electrical parameters
Working voltage: 5～24V.
Current: Less than 170 milliamps.
Output formats: Digital quantities RS232, RS485 or RS422, analog quantities 0～5V, 0～10V or 4～20mA.
Resolution: 1mm or 0.1mm.
Accuracy: 1mm.
3. Mechanical parameters
Shell material: Special dust-proof aluminum alloy coating or plastic spraying.
Window: Glass window.
Wiring method: Aviation plug or reserved 1m cable.
4. Environmental parameters
Protection level: Waterproof and dustproof, IP67 rating, in accordance with IEC529 standard.
Storage temperature: -30℃～+80℃.
4. Technical Specifications
1. Measuring range: 0.2～200m (customized);
2. Accuracy: 1mm;
3. Resolution: 1mm/0.1mm;
4. Sampling frequency: 2Hz～10Hz;
5. Working temperature: -50℃～+200℃
6. Storage temperature: -30℃～+80℃
7. Working voltage: DC 5V～24V
8. Power consumption: 1W
9. Output formats: RS232, RS485, TTL, 0～5V, 0～10V, 4～20mA, NPN
10. Spot diameter: 10mm@50m
5. Maintenance and Care
1. Clean and keep dry.
2. Blow off the dust on the mirror surface.
3. Do not touch the lens with your fingers.
4. Only use a clean soft cloth for wiping. If necessary, you can use pure alcohol or water to moisten the cloth for wiping.
5. If the instrument is accidentally wetted, do not expose it to direct sunlight, and let it air dry instead.
6. Turn off the power if you don't use it for a long time, so as not to affect the service life.
| Industry Category | Electronic Components & Supplies/Sensors/Displacement Sensors |
|---|---|
| Product Category | |
| Brand: | |
| Spec: | FTM |
| Stock: | 10 |
| Manufacturer: | 北京飞拓信达激光技术有限公司 |
| Origin: | 111107 |
