High-temperature resistant laser displacement sensor

FTM - Water-Cooled Laser Displacement Sensor

I. Product Introduction:

The water-cooled laser displacement sensor utilizes a water circulation system to create a suitable working environment for the sensor in extreme conditions (high or low temperatures). The operating temperature range of the sensor is -50°C to +200°C. The sensor is equipped with water inlet and outlet ports; simply connect it to a circulating water source during operation.

II. Application Scenarios

1. Measuring distances of various objects using a reflector;

2. High-temperature objects can be measured with a filter;

3. Explosion-proof housing can be used in hazardous environments;

4. A swing motor can be used for 2D profile measurement.

III. Performance Specifications

1. Optical Parameters

Laser Type: Red laser diode.

Wavelength: 620nm to 650nm.

Laser Class: Class 2.

Beam Type: Spot or line.

Output Power: Less than 1mW.

2. Electrical Parameters

Operating Voltage: 5V to 24V.

Current: Less than 170mA.

Output Format: Digital RS232, RS485, or RS422; Analog 0-5V, 0-10V, or 4-20mA.

Resolution: 1mm or 0.1mm.

Accuracy: 1mm.

3. Mechanical Parameters

Housing Material: Special dust-proof aluminum alloy with coating or spray painting.

Window: Glass window.

Connection Method: Aviation connector or pre-wired with 1m cable.

4. Environmental Parameters

Protection Rating: Water and dust resistant, IP67 rating according to IEC529 standard.

Storage Temperature: -30°C to +80°C.

IV. Technical Specifications

1. Measuring Range: 0.2 to 200m (customizable);

2. Accuracy: 1mm;

3. Resolution: 1mm/0.1mm;

4. Sampling Frequency: 2Hz to 10Hz;

5. Operating Temperature: -50°C to +200°C

6. Storage Temperature: -30°C to +80°C

7. Operating Voltage: DC 5V to 24V

8. Power Consumption: 1W

9. Output Formats: RS232, RS485, TTL, 0-5V, 0-10V, 4-20mA, NPN

10. Beam Diameter: 10mm@50m

V. Maintenance and Care

1. Clean and keep dry.

2. Blow dust off the lens surface.

3. Do not touch the lens with fingers.

4. Use only a clean, soft cloth for wiping. If necessary, moisten the cloth with pure alcohol or water.

5. If the instrument gets wet accidentally, do not expose it to direct sunlight; allow it to air dry.

6. If not in use for an extended period, turn off the power to avoid affecting its lifespan.