KD-2B Transcutaneous Electrical Nerve Stimulator

;

The KD-2B Transcutaneous Electrical Nerve Stimulation (TENS) device is a low-frequency electrotherapy instrument. It delivers specific low-frequency pulse currents to the human body through skin electrodes or electroacupuncture stimulation at Ah-shi points, primarily for treating pain-related conditions.

The TENS device features three output channels and can switch between three treatment modes: continuous output, slow intermittent output, and fast intermittent output. The pulse width, frequency, and current intensity are all continuously adjustable.

It outputs three independent low-frequency pulse currents, allowing treatment for three patients or three areas simultaneously;

Offers three treatment states: continuous output, slow intermittent, and fast intermittent;

Pulse width, pulse frequency, and output intensity are continuously adjustable over a wide range, with a locking function to ensure patient safety;

Pulse frequency and output status are displayed;

Time settings can be configured as fixed or variable duration.

This device can be used for various acute and chronic pain conditions: postoperative incision pain, ligament injuries, acute sprains and contusions, dysmenorrhea, joint pain, cervical pain, residual limb pain, epicondylitis, reflex sympathetic dystrophy, etc. It also supports transcutaneous therapy and high-efficiency electroacupuncture treatment.

[Technical Parameters]

(1) Output pulse waveform: bidirectional asymmetric square wave.

(2) Output pulse width: 20μs～500μs, tolerance ±20％.

(3) Output pulse frequency: continuously adjustable from 2Hz～160Hz, tolerance ±10％.

(4) Output current: for each of the three output channels, the peak current Ip should exceed 100mA and be less than 120mA under a 1kΩ load resistance.

(5) Maximum output voltage: the peak open-circuit output voltage should not exceed 500V.

(6) Continuous operation time: not less than 4 hours.

(7) Safety classification: Class I BF type.

[Device Components] Consists of the main unit and output cables/electrodes;

Output cables include electroacupuncture wires and electrode wires; electrodes include round and square types;

Electrode dimensions: square 40mm×80mm, round φ40mm, tolerance ±10%

[Device Dimensions and Weight]

a) Dimensions: 470mm×350mm×180mm;

b) Weight: approximately 9kg.