Fluorocarbon Paint Factory

Fluorocarbon Paint Manufacturer Wholesale - Paint Sales [Mr. Liu: 186 0280 5638] Supply to Sichuan, Chengdu, Yunnan, Chongqing, Guizhou, and other regions; Fluorocarbon paint uses fluororesin as the main film-forming coating, offering excellent weather resistance and corrosion resistance, making it highly suitable for outdoor environments with complex conditions. It is widely used in the construction industry, chemical equipment, transportation facilities, marine engineering, and other fields.

Advantages of Fluorocarbon Paint:
Strong Weather Resistance: Fluorocarbon paint can be used for long periods in outdoor environments, such as under conditions of wind, rain, lightning, and UV exposure, without easily chalking or cracking.
Strong Corrosion Resistance: Fluorocarbon paint can withstand corrosion from chemical solvents like acids and alkalis, making it suitable for environments such as chemical plants, where it effectively protects the substrate.
High Physical and Mechanical Strength: The surface of fluorocarbon paint is hard and impact-resistant, making it suitable for applications requiring protection, such as traffic guardrails.
Strong Adhesion: It adheres well to substrates like stainless steel, copper, cement, and composite materials, and is not prone to peeling.
Self-Cleaning Properties: Fluorocarbon paint does not attract dust, and surface dirt can be cleaned by rainwater.
Good Decorative Qualities: Fluorocarbon paint comes in a variety of colors and finishes, such as matte and gloss, offering excellent decorative performance.

When using fluorocarbon paint, the following points should be noted:
1. Storage and Transportation: Fluorocarbon paint should be stored in a dry, ventilated, and light-protected environment, away from fire and heat sources. During transportation, it should be protected from rain, sun exposure, and impact.
2. Pre-Construction Preparation: Ensure the substrate surface is clean, flat, and free of oil, dust, and other impurities.
3. Construction Environment: The construction temperature should be between 0-35°C, with relative humidity below 80%. The substrate temperature should not be lower than 5°C. Avoid construction during rain, snow, fog, frost, strong winds, or when relative humidity is below 75%.
4. Mixing and Usage: Mixed fluorocarbon paint should be used within 5 hours. Avoid mixing large quantities at once to prevent curing due to prolonged standing. Before use, it should be filtered through a 120-200 mesh filter.

This article is excerpted from the internet. If there are any issues, please contact us, and we will address them promptly. Thank you.