China DS-DCL600 Residual Chlorine/Total Residual Chlorine/Chlorine Dioxide Online Analyzer - China Supplier
China DS-DCL600 Residual Chlorine/Total Residual Chlorine/Chlorine Dioxide Online Analyzer - China Supplier China DS-DCL600 Residual Chlorine/Total Residual Chlorine/Chlorine Dioxide Online Analyzer - China Supplier

DS-DCL600 Residual Chlorine/Total Residual Chlorine/Chlorine Dioxide Online Analyzer

Price:元1
Industry Category: Measurement-Analysis-Instruments
Product Category:
Brand: 西安东升
Spec: DS-DCL600


Contact Info
  • Add:西安市高新区锦业二路逸翠尚府北区8号楼1单元1701, Zip: 710000
  • Contact: 魏经理
  • Tel:15686405979
  • Email:1528126689@qq.com

Other Products

Description
Additional Information

Product Introduction

The membrane-based residual chlorine/total residual chlorine/chlorine dioxide electrode is a composite digital electrode using the membrane amperometric method. The detection part employs special permeable membrane technology, offering resistance to chemical interference (primarily surfactants) and reduced pH dependency. The sensor is not limited by water quality conditions and can be applied in environments such as tap water, swimming pools, medical wastewater, sewage treatment, and industrial wastewater. The sensor features fast response, stable performance, low cost, and minimal maintenance, providing users with reliable and accurate data.

Features

lMinimal influence from pH;

lDigital signal processing internally, immune to electromagnetic interference;

lStable operation with fast response;

lNo zero calibration required;

lLow cost with minimal maintenance;

Typical Applications

lConventional drinking water, tap water, swimming pool water, aquaculture, seawater;

lMedical wastewater, medical sewage;

lDosing equipment, circulating water, cooling water;

Sensor Technical Parameters

Range

0-2ppm; 0~20 ppm; 0.5~200 ppm

pH Range

pH value: 4~9

Conductivity Range

10μS/cm~50mS/cm (seawater)

Flow Rate

In flow cell: 250~500ml/min

Slope Drift

Approximately -1% per month

Response Time

T90: approximately 2 minutes (reaching 90% of measured value)

Zero Calibration

Not required

Slope Calibration

On the measuring device, analyzed and determined via the DPD-1 method

Temperature Compensation

Integrated automatic temperature compensation

Material

PVC-U, stainless steel, microporous hydrophilic membrane,

Operating Temperature

Water temperature: 0~ 45℃ (no condensation in water)

Ambient room temperature: 0~55

Output Signal

Digital signal (isolated MODBUS RS485)

Dimensions

Diameter 25mm * length 205mm

DS-115T Controller Technical Parameters:

Display Output

128*64 graphic dot matrix LCD with strong LED backlight, operable under direct sunlight

Power Supply

AC power: 85-500VAC (50/60HZ); DC power: 9~36VDC

Main Materials

PA66+GF25+FR (upper cover); aluminum alloy powder coating (lower shell)

Output

Three channels of 4-20mA

Relay

Three relays, programmatically set response parameters and values

Digital Communication

Equipped with MODBUS RS485 communication function for real-time transmission of measured values

Storage Temperature

-20 to 70℃

Operating Temperature

-15 to 60℃

Waterproof Rating

IP65/NEMA4X

Dimensions

145mm*125mm*162mm (length*width*height)

Weight

1.35KG

Industry Category Measurement-Analysis-Instruments
Product Category
Brand: 西安东升
Spec: DS-DCL600
Stock:
Origin: China / Shaanxi / Xianshi
About Toocle.com - Partner Programme - Old Version
Copyright © Toocle.com. All Rights Reserved.
(浙)-经营性-2023-0192